Topic: Alarm syst is going nut's !
in Forum: C3 Electrical
Already a Member?
Click Here to Login
Not yet a Member?
Click Here to Register for Free!
Hello everybody
I work all weekend on the vette ( 1980 ) trying to get the alarm syst working,
and it is now working but in reverse order let me explain...
when I unlock the driver door the systeme start , when I lock the door the systeme stop beeping
and do not stop until I look the door.
I check every switch they are all ok !!!!!!!!!!!!!
(door,hood,t-top)
let me now if you have a solution.
Norm

I work all weekend on the vette ( 1980 ) trying to get the alarm syst working,

and it is now working but in reverse order let me explain...
when I unlock the driver door the systeme start , when I lock the door the systeme stop beeping

I check every switch they are all ok !!!!!!!!!!!!!

let me now if you have a solution.
Norm
SPONSOR AD:: (Our Sponsors help support C3VR)
Former Member
Send PM
HAMPTONVILLE, NC - USA
Joined: 11/5/2001
Posts: 169
Vette(s): 1978 INDY PACE CAR #3016 of #6502 built. Has original Pace car decals still in GM boxes the way it was delivered to GM dealers. per NCRS "UPDATE" Decals applied as of 3/8/02 (ALL ORIGINAL)
Normand, In this same column there is a thread called ( Project Make Factory Anti-Theft Alarm Work Again). In there Red Hot Vettes posted a similiar problem with his 1980 vette. The locking pins in his T-tops were not connecting and caused a open circuit which made his alarm sound all the time. This could possibly be your problem, check his post out to get more details.
-
- Doug
- 78 PACE
-
- Doug

- 78 PACE
Norm,
if the switch is working backwards, i would try and switch the wires around on the switch. one should be yellow and the other one should be lt blue just about all of your lt blue is for your alarm system. if you want to check your switch then you are going to have to take a DMM and check it across the terminals. What i would do is just take your yellow wire and the lt blue wire and switch them on the switch and then try your alarm system. it should work.
tom
if the switch is working backwards, i would try and switch the wires around on the switch. one should be yellow and the other one should be lt blue just about all of your lt blue is for your alarm system. if you want to check your switch then you are going to have to take a DMM and check it across the terminals. What i would do is just take your yellow wire and the lt blue wire and switch them on the switch and then try your alarm system. it should work.
tom
silver 80
in Forum: C3 Electrical
SPONSOR AD: (Our Sponsors help support C3VR)