Home page
SPONSOR AD SPONSOR AD

Topic: Alarm syst

in Forum: C3 Electrical


Alarm syst

Posted: 4/19/02 11:20am Message 1 of 3
Former Member
Send PM
Joined: 4/11/2002
Posts: 327
Hi everybody summer is here and the baby is back to the garage after all the repairs.

Now I have the stupid question ? how do you put on the alarm syst on and off or is there a light somewhere that show the system is on or somme beep because I whant to now if it's working. 1980 vette L-48.
Have you all a good season with your baby.
Norm
|laugh| |smokin|


SPONSOR AD:: (Our Sponsors help support C3VR)

Alarm syst

Posted: 4/20/02 9:33am Message 2 of 3
Former Member
Send PM
HAMPTONVILLE, NC - USA
Joined: 11/5/2001
Posts: 169
Vette(s): 1978 INDY PACE CAR #3016 of #6502 built. Has original Pace car decals still in GM boxes the way it was delivered to GM dealers. per NCRS "UPDATE" Decals applied as of 3/8/02 (ALL ORIGINAL)
I assume you are talking about the factory alarm, here are some inserts from the NCRS technicial manual The anti-theft alarm system is armed only by locking the drivers door with the key, and is activated by opening either door or the hood. The alarm may also be activated by operating the roof handle.
To arm the alarm, lock the drivers door with the key as noted above. Reach into vehicle through the open window and either unlock and open the drivers door, release the hood, or pull the handle as if to remove a roof panel. The system is disarmed or the alarm is shut off by moving the drivers door lock to the unlocked position with the key.
Hope this helps solve your problem.
-
- Doug |blinkyeyes|


Alarm syst

Posted: 4/21/02 10:29pm Message 3 of 3
Former Member
Send PM
Joined: 4/11/2002
Posts: 327
Thank you for the info Doug
You have a very nice pace car
Norm |rollysmile| |clown|


in Forum: C3 Electrical


SPONSOR AD: (Our Sponsors help support C3VR)