Topic: Alternator Plug & Wire Replacement II
in Forum: C3 Electrical
Already a Member?
Click Here to Login
Not yet a Member?
Click Here to Register for Free!
Gold MemberSorry for the double post but I forgot to ask something else which may be related to the problem.
While cruisin, the speedo needle was "floating" anywhere from 5 - 8 mph. Tach needle was steady. Could this have anything to do with the brown wire breaking off or is this a seperate issue?
Thanks.
SPONSOR AD:: (Our Sponsors help support C3VR)
Lifetime MemberGreensburg, IN - USA
Joined: 9/24/2003
Posts: 5188
Vette(s): Previous: 1984 Silver / Charcoal Coupe, 1988 Maroon Coupe / 1989 Artic White Coupe / 2001 Speedway White Roadster / Present:1976 Stingray Black / Black, Auto, 350 slightly modified (355 hp) Luxor Wires Redline Tires. / 1989 Roadster Bright Red...
That is the speedometer cable sticking in the housing. You can disconnect the cable from the back of the speedo and pull the cable out. Lube it with a thin layer of grease, and put it back in the housing, then reconnect it. This usually works. I have done a LOT of them in various cars, including ours. Sometimes it dies not work and you need to replace the cable and housing to fix the problem.
in Forum: C3 Electrical
SPONSOR AD: (Our Sponsors help support C3VR)