Topic: Another back up light question
in Forum: C3 Electrical
Already a Member?
Click Here to Login
Not yet a Member?
Click Here to Register for Free!
Back up lights worked fine prior to replacing shifter console, e-brake cover, new carpet and some work behind the dash center section. Does any of the wiring for the back up lights run around/through any of these areas? Checked fuse first thing..thats okay. Seemed to be plenty of wires and connectors under shifter console. Problem under there?? 



202010261047r.jpg)
DanT
SPONSOR AD:: (Our Sponsors help support C3VR)

Moderator
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 20214
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/
Am-Fm/map light National/Regional/Chapter NCRS "Top Flight"
#2-1985 Bright Red/Carmine Cp.L-98/auto
Member: NCRS, NCRS Texas, Corvette Legends of Texas
NO reverse light components under the console on a 4 speed car, so the problem must be elsewhere. If the turn signals work, then the fuse is OK. The problem may be under the car, at the switch, which is attached tot eh side of the trans. Check the other thread from today for a visual. The wire colors are the same as the '72 in the other thread...pink from the fuse, to the t-sig flasher, then to the reverse light switch on the trans. Then it turns into a light green wire back to the lamps in the rear panel.
hth
hth
Joel Adams
C3VR Lifetime Member #56
My Link
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"
in Forum: C3 Electrical
SPONSOR AD: (Our Sponsors help support C3VR)