Topic: Blower Motor Console Speed Switch - 1979 Vette
in Forum: C3 Electrical
Already a Member?
Click Here to Login
Not yet a Member?
Click Here to Register for Free!
What I know:
With the ignition on, blower motor operates at low speed, however selecting 2nd, 3rd or High has no affect. Running test wire from + side of battery to Orange (high), Lt. Blue (3rd) and Tan (2nd) wires at switch connector results in blower operating at correct speeds. Seems to me the motor and relay are OK.
Is the console switch the problem or have I overlooked something?
Albert
With the ignition on, blower motor operates at low speed, however selecting 2nd, 3rd or High has no affect. Running test wire from + side of battery to Orange (high), Lt. Blue (3rd) and Tan (2nd) wires at switch connector results in blower operating at correct speeds. Seems to me the motor and relay are OK.
Is the console switch the problem or have I overlooked something?
Albert
SPONSOR AD:: (Our Sponsors help support C3VR)
I had the same thing on my '69, it was the switch.
Matt
Matt
Hello,
Had the same problem with my 82. Turns out the connector had fallen off of the fan switch. Got access to switch by partially removing driver side console side panel.
Just my 2 cents
Tom
Had the same problem with my 82. Turns out the connector had fallen off of the fan switch. Got access to switch by partially removing driver side console side panel.
Just my 2 cents

Tom
|IMG|http://www.c3vr.com/member_uploads/5701_5800/5782/Lauren_0033.jpg|/IMG|
in Forum: C3 Electrical
SPONSOR AD: (Our Sponsors help support C3VR)