Topic: Blower motor
in Forum: C3 Electrical
Already a Member?
Click Here to Login
Not yet a Member?
Click Here to Register for Free!
Limited Member
Send PM
Hamilton, MI - USA
Joined: 11/9/2023
Posts: 21
Vette(s): 1971 LS6 COUPE, 1967 435HP COUPE 2024 Z06
I have a 1971 LS6 replaced starter with high torq. starter Blower motor would not work after that ,Put a ground wire to the frame. Now I have only high blower. Any one have any thoughts why I dont have low or medium fan?
SPONSOR AD:: (Our Sponsors help support C3VR)
Lifetime MemberModerator
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 20214
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/
Am-Fm/map light National/Regional/Chapter NCRS "Top Flight"
#2-1985 Bright Red/Carmine Cp.L-98/auto
Member: NCRS, NCRS Texas, Corvette Legends of Texas
If memory serves, the blower motor ground is attached to the bell housing bolt behind the starter. MANY times, that ground is moved to the starter. It's possible it got left off? Also, the same ground goes to the wiper motor. Do you have wiper function?
|UPDATED|2/27/2025 7:12:41 AM (AZT)|/UPDATED|
Joel Adams
C3VR Lifetime Member #56 
My Link 
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"
in Forum: C3 Electrical
SPONSOR AD: (Our Sponsors help support C3VR)