Hey there Vette Fans

Questions for the shark tank:

I am converting to an electric fan set up with my new aluminum radiator. Is the Painless wiring kit the best way to go? A friend mentioned that you could actually buy the fan relay, termostat swtich, etc for a fraction of the cost - but I guess it is no longer "painless".

Also, would like to track down an up to date alternator bracket with a turnbuckle adjustment (don't know what those are actually called). Saw some from March but they are all "Outboard". I believe our wheels need an inboard. Correct?

Any comments, suggestions, tips etc are greatly appreciated.

Thanks all,

Luke

As Pink Floyd once said

"Is there anybody out there"

Luke

 Try looking at Street & Performance, or Zoops. I have the Zoops on mine and you will need the outboard. The inboard puts the A/C compressor and the Alt. above the intake manifold. That makes it to high for the hood clearance. I have both. Inboard on my Street Rod, and outboard on my 71. If you use both A/C and Alt. on your vette you will have to change over to a Sanden 501 compressor. That's what I'm having trouble with now, but I think I have it solved finally. I had to make up a fitting by cutting two  fittings in half and tig welding them back together to get the one I need. I needed a #12 o-ring on one end to fit in a 1/2" hose. They don't make a 180 deg. fitting to do this. Hope it works.  Kind of cost me $200. to get it made. Speeding ticket on way to Rapid City. Went 13 yrs. without one of those. And fuel.