Topic: Gauge Wiring Help
in Forum: C3 Electrical
Already a Member?
Click Here to Login
Not yet a Member?
Click Here to Register for Free!
I just got done taking apart the console in my 69 and replacing all the bulbs and lenses. Problem is when i put it back together my fuel gauge and water temp gauge no longer works. I'm pretty sure I just put it back together wrong or missed a wire as no fuses are blown and the other gauges work fine.
Does anyone have a photo of the back of an assembled center gauge cluster? Or can someone tell me where to see a wiring diagram or what I may have missed.
Thanks
SPONSOR AD:: (Our Sponsors help support C3VR)

Moderator
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 20214
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/
Am-Fm/map light National/Regional/Chapter NCRS "Top Flight"
#2-1985 Bright Red/Carmine Cp.L-98/auto
Member: NCRS, NCRS Texas, Corvette Legends of Texas
Here's a partial diagram of those gauges. Hope it helps.
You may have left a ground for the cluster loose, also...
You may have left a ground for the cluster loose, also...
Joel Adams
C3VR Lifetime Member #56
My Link
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"

Lemon Grove, CA - USA
Joined: 10/17/2007
Posts: 2041
Vette(s): 1982 C3 Collectors Edition 44000 miles, sat in the sun most of its life, My wife purchased it for me for Father's Day in 2007 from her girlfriend that had it for 19 years. It is on the road again. I'm retired but it is now my daily driver.
Got everything that you need in pictures same thing happened to me. So when I got one from a guy that parts out C3's to use to compare mine with. I took lots of pictures.
When do you need them is this a tomorrow project or after Christmas?
When do you need them is this a tomorrow project or after Christmas?

Lemon Grove, CA - USA
Joined: 10/17/2007
Posts: 2041
Vette(s): 1982 C3 Collectors Edition 44000 miles, sat in the sun most of its life, My wife purchased it for me for Father's Day in 2007 from her girlfriend that had it for 19 years. It is on the road again. I'm retired but it is now my daily driver.





Hope this helps Note mine is a 82 CE so the tape is to keep the power to the clock from shorting. The big problem I had was shorting out the gage posts. Some are insulated others are not.
in Forum: C3 Electrical
SPONSOR AD: (Our Sponsors help support C3VR)