Home page
SPONSOR AD SPONSOR AD

Topic: Guage Adjustments ? Need Advice.

in Forum: C3 Electrical


Guage Adjustments ? Need Advice.

Posted: 5/6/04 2:03am Message 1 of 3
Former Member
Send PM
Hobe Sound, FL - USA
Joined: 11/19/2003
Posts: 354
Vette(s): 1962 - 1963 - 1965 - 1980 1986 Roadster 1979 - L-82 - 1989 Roadster 1990 ZR-1.
I have just completed transferring guages to new bezel.
Fixed clock, new bulbs, lense, etc. When the guages were out, I may have moved the needles. Will these go back to correct readings when plugged in ? Should I have left them alone, not touched them ? I can see voltage probably correcting itself, but gas, oil pressure, temp?
1979 L-82. Any advice appreciated. I sure don't want to take apart again. Thanks for any advice. |saluteflag| |cool|


SPONSOR AD:: (Our Sponsors help support C3VR)

Guage Adjustments ? Need Advice.

Posted: 5/6/04 3:42am Message 2 of 3
Former Member
Send PM
Joined: 12/16/2003
Posts: 630
Unless you removed and then re-installed the needles you should be okay. If the needles were removed, I'm not sure what the fix is, but I could find out if needed.


Guage Adjustments ? Need Advice.

Posted: 5/6/04 6:18am Message 3 of 3
Former Member
Send PM
Hobe Sound, FL - USA
Joined: 11/19/2003
Posts: 354
Vette(s): 1962 - 1963 - 1965 - 1980 1986 Roadster 1979 - L-82 - 1989 Roadster 1990 ZR-1.
Big Fish - Thanks for info. I did not remove the needles off the shafts. Never thought of that. So all guages should go back to normal.
Appreciate the info. |saluteflag| |cool| |cool|


in Forum: C3 Electrical


SPONSOR AD: (Our Sponsors help support C3VR)