Home page
SPONSOR AD SPONSOR AD

Topic: High amperage draw

in Forum: C3 Electrical


High amperage draw

Posted: 9/7/04 10:33pm Message 1 of 5
Former Member
Send PM
Park Rapids, MN - USA
Joined: 1/21/2004
Posts: 4
Vette(s): 1968 convertable 327 / 350 hp 4spd white / blk int
Hello, I was wondering if anyone has experienced the same problem I'm having. I have a '68 corvette conv. with no air ,power windows or any other power accessory gadgets ,real basic .The problem is the amp gauge shows -40 or -30 when I'm driving the car ,yet I never have low batery problems ,the headlights work fine ,etc ,etc with the exception of the wipers they don't respond to the switch and opprerate unpredictably,but the battery seems to be charged and starts the car well, I just feel there must be a short somewhere to cause this high discharge on the gauge. |headscratch|


SPONSOR AD:: (Our Sponsors help support C3VR)

High amperage draw

Posted: 9/8/04 3:42am Message 2 of 5
Former Member
Send PM
KERNERSVILLE, NC - USA
Joined: 1/13/2004
Posts: 1355
Vette(s): 1968 L-71 convertible
If your wipers are behaving erratically, I'd start by unplugging the wiper motor and checking the gauge.


High amperage draw

Posted: 9/8/04 11:10am Message 3 of 5
Profile Pic
Lifetime MemberLifetime Member
Moderator
Send PM
CUYAHOGA FALLS, OH - USA
Joined: 12/2/2003
Posts: 6424
Vette(s): 1975 C3 Red, T-Tops, Black Interior. All I need is time and money! Getting there!
If there are no other problems, I would suspect the gauge itself. You want to use an inductive ampmeter to measure the actual draw. Check it at the alternator wire, and at the battery. Any shop has the inductive meter. AutoZone can also do the test for free. If you get the right guy who understands draw testing.


High amperage draw

Posted: 9/8/04 12:24pm Message 4 of 5
Profile Pic
Lifetime MemberLifetime Member
Send PM
Hot Springs, AR - USA
Joined: 4/24/2004
Posts: 3236
Vette(s): 69 Conv #'s match 427, TKO-600/.64, 3.36HD-Posi, HT, T/T, PS, PB, PW, SP, Leather, Comp XE264HR & Roller Rockers & Lifters, Air-Gap RPM intake, Holley St Av 770 VS, MSD 6AL+Dist+Blaster SS, K&N, Jet-Hot Hooker Side-Pipes, Steeroids, Al Rad, Spal Fans
 kstyer said: AutoZone can also do the test for free. If you get the right guy who understands draw testing. 


i.e. if you go to the cuyahoga falls AutoZone on sunday and ask for a guy named Ken. |laugh|


High amperage draw

Posted: 9/8/04 8:58pm Message 5 of 5
Former Member
Send PM
Park Rapids, MN - USA
Joined: 1/21/2004
Posts: 4
Vette(s): 1968 convertable 327 / 350 hp 4spd white / blk int
Thanks all ,I really enjoy seeing pics of members cars,and of course the useful info.I've been too involved with other projects to take the time to trouble shoot this problem and of course driving the vette as much as possible before it gets too cold and I have to put it in storage for winter.If anyone is in northern MN. Sept 11 there is a show in Walker MN ( The No Class Car Show ) Will have the vette there ,thanks and good luck to all.

Whiteknight |wavey|


in Forum: C3 Electrical


SPONSOR AD: (Our Sponsors help support C3VR)