Home page
SPONSOR AD SPONSOR AD

Topic: How to remove washer pump?

in Forum: C3 Electrical


How to remove washer pump?

Posted: 11/24/03 1:49am Message 1 of 7
Former Member
Send PM
France
Joined: 7/16/2003
Posts: 45
Vette(s): C3 1979 L-48 th350 96000miles
How ? on my 1979
|headscratch|

|UPDATED|11/24/2003 2:03:25 AM (AZT)|/UPDATED|



|IMG|http://jerome.laurent6.free.fr/Ma%20Crovette/3%204%20avant%20signature.jpg|/IMG| |IMG|http://jerome.laurent6.free.fr/Smilies/la%20fance.gif |/IMG| I'm french so excuse me for my english
SPONSOR AD:: (Our Sponsors help support C3VR)

How to remove washer pump?

Posted: 11/24/03 6:56am Message 2 of 7
Former Member
Send PM
United Kingdom
Joined: 10/4/2002
Posts: 122
Vette(s): Red 1980 350 auto w/ quickshsift Edelbrock intake / carb Crane Fireball cam 0 - 60 6.3s
Is your washer pump screwed into the bottom of your washer fluid bottle? (like the 80) If so, remove the filler tube from the washer fluid bottle, by unscrewing the tube where it is attached to the inside of the fender, then pulling it out. Then you need a long extension bar and a large deep socket (can't remember the right size, sorry! Around 19 or 20 mm i think) Look down inside the bottle and you'll see a plastic nut holding the pump in place. Unscrew this and the pump will drop out the bottom. Does the 79 have the side vents in the fender, or are they filled in on yours? If not, it's a lot easier to remove a vent so you can catch the pump when it falls, and it's much easier to put the new one back in!


|IMG|http://www.nottingham.ac.uk/~eaztl1/images/vette_4_sig.jpg |/IMG| Red 1980 350 auto w/ quickshsift Edelbrock intake / carb Crane Fireball cam 0 - 60 6.3s

How to remove washer pump?

Posted: 11/24/03 8:18am Message 3 of 7
Former Member
Send PM
ATOKA, TN - USA
Joined: 9/25/2002
Posts: 120
Vette(s): 1975 Coupe, 1998 Coupe, 2000 coupe
On my 75, I removed the whole tank. There were only I believe 2 or 4 bolts holding it in. Once the tank was out, then the pump was easy to replace. I bought the new pump at autozone, as it's a common item on a lot of different cars, especially the GM line. I also checked the pump after installing it, and before I remounted the tank. My pump was bad when I changed it, but I also found a wire that was lose at the same time. Works like a champ now. |thumb|


1975/L48/Coupe/4 Speed(1 of 1057)/Headers/true duals/aluminum intake/holley 750/MSD ignition/roller rockers/ |IMG|http://www.C3VR.com/member_uploads/1701_1800/1717/BSVette75d_sig.jpg |/IMG|

How to remove washer pump?

Posted: 11/24/03 11:56am Message 4 of 7
Former Member
Send PM
Melville, NY - USA
Joined: 9/27/2003
Posts: 1
Vette(s): 1981 White Corvette Coupe
It's a 7/8" deepwell socket with about 12" extension

Check out this link: http://www.corvetteactioncenter.com/forums/showthread.php?s=&postid=290519#post290519

Hope that helps!

- Jeremy


How to remove washer pump?

Posted: 11/24/03 8:15pm Message 5 of 7
Former Member
Send PM
SOUTHWICK, MA - USA
Joined: 6/26/2003
Posts: 336
Vette(s): 1975, L-48 coupe, 4-speed, light mods
Make sure you use the right size socket and a long enough extention. If you don't you will strip the plastic nut. Other than that it's a snap.


Glenn's Bright Blue 75 T-Top
L48, 4 Speed, Dual Exhaust

How to remove washer pump?

Posted: 11/24/03 8:29pm Message 6 of 7
Former Member
Send PM
Joined: 8/25/2002
Posts: 4
Jerome -

I see you're French. A Vette must be fairly uncommon in France. Does it attract a lot of attention?

Happy motoring, Doug

|UPDATED|11/24/2003 8:29:26 PM (AZT)|/UPDATED|



How to remove washer pump?

Posted: 11/24/03 11:41pm Message 7 of 7
Former Member
Send PM
France
Joined: 7/16/2003
Posts: 45
Vette(s): C3 1979 L-48 th350 96000miles
Thanks for your reply |saluteflag|

Riversidegold--> a corvette in France is uncommon and it's attract a lot of attention! but few people knows what is a corvette (they only knows the name) and they watch an uncommon car! so a corvette in France is less historical than in the USA

|cheers|


|saluteflag|


|IMG|http://jerome.laurent6.free.fr/Ma%20Crovette/3%204%20avant%20signature.jpg|/IMG| |IMG|http://jerome.laurent6.free.fr/Smilies/la%20fance.gif |/IMG| I'm french so excuse me for my english

in Forum: C3 Electrical


SPONSOR AD: (Our Sponsors help support C3VR)