Topic: Low beams no high though!
in Forum: C3 Electrical
Already a Member?
Click Here to Login
Not yet a Member?
Click Here to Register for Free!
Hi!
My 69 has an electrical problem with head lights,the low beams work but the high beams don't. I have changed and put in new lights all the way across so it's not a bulb burnt thing, I did however put in hallagen bulbs. I have also changed the switch on the floor to change from low to high.
Is there another switch or something that could cause this problem.
Thanks,
Len
My 69 has an electrical problem with head lights,the low beams work but the high beams don't. I have changed and put in new lights all the way across so it's not a bulb burnt thing, I did however put in hallagen bulbs. I have also changed the switch on the floor to change from low to high.
Is there another switch or something that could cause this problem.
Thanks,
Len

|IMG| |/IMG|http://www.msnusers.com/LennyMary/shoebox.msnw?action=ShowPhoto&PhotoID=25
SPONSOR AD:: (Our Sponsors help support C3VR)
Hi Len , remove the plug from the dimmer switch and try putting a jumper from the hot socket and try lighting them that way .
Geo
Geo


I will give that a try and see what happens,I did change the dimmer switch but it wouldn't hurt to give your idea a go.

|IMG| |/IMG|http://www.msnusers.com/LennyMary/shoebox.msnw?action=ShowPhoto&PhotoID=25
If you haven't figured it out yet It could be corrosion in the dimmer switch connector or at the bulb connections. Also make sure the ground wire to the high beams is good. Doesn't sound like a big problem.
in Forum: C3 Electrical
SPONSOR AD: (Our Sponsors help support C3VR)