dome lights and interior lights are off so dont think its the mercury switch but will check. Thanks BB78

yes its the anti theft relay and no drain from this as I connect/disconnect it??? but clicking sound which relays make so probably not the battery drain but the alarm is not working either so it could be shorting, the drain stops on the clock/radio/dome light fuse20a so just have to isolat the problem. obviously the clock will drain  it but not that quickly, the radio is not taking any power its not hot wired, so it could be the dome is shorting or relay cycling as the dome will not come on with the doors open, so I am trying to fix that problem  which is probably the dome relay timer$85. so would like to get the dome issue solved first and see if that corrects the problem also have a new alarm harness to install see if I can get the alarm to work and rule that out althought the anti theft relay is no longer in stock... so searching to see who might still have it..zip's is not ahndling them anymore?  thanks BB78

Hope this might help

The way the dome lights come on

 1 Head light sw turned fully CCW

 2 Each door sw ( a grnd thru sw when door opened)

 3 Dome light timer if installed, the timer is placed in between the two door sw and is powered all the time.

I am not sure of the connector others can help, but you should be able to remove the timer and jumber the wht to wht wires or it may be wht/brn to wht. This would eliminate the timer and it would operate like the cars without the timer.

As to the anti theft relay if you hear it click when disconnected then it will be a drain, it may be slight but it would be comparable or a little more than the clock. And this means your alarm system is always armed even though it is not tuning on alarm

 

If the circuits are the same as the 77 if you pm me I can send you the breakdown of these circuits from a real good electrical T/S book for the 77 they are jpeg images

Hope its ok to post these I have this whole book in jpeg format this is way better than trying to read the wire diagrams these show the complete crkt your trying to work on I also have the 1980 book in jpeg format if any one needs info from these books pm me and I will try to get it to yourraider12010-01-21 12:40:16

You talking about the shop manual Robert?  I have 1981 Shop manual hard copy.  You got scanner at home too, I see.

Here is the cover for electrical these are the best they have the cks and show where all the components are located

Thanks rrader1 before I got your info I had the seat out and on my back wiht my head up into the fuse panel and removed the timer to check for rust and corrosion and i really dont need a timer but would like to get the lights on. So yes I can jump it and see if I get the dome light on  then I know its not a problem elsewhere, and if I want the timer I can add it back in.  I get a clicking noise on the relay when I plug  the wire connector to it or remove it. Whether the relay is doing its jpb or not don't know but pwer is to it. I have a new harnes to co to the lock cylinder as soon as time permits. Iwas thinking the alarm is on and powered but the lock connector is not working right. THe horn works as when I removed the button on the lock cylinder it went off, so the harness that the key activates is probably at fault.