Topic: Searching for the Impossible?
in Forum: C3 Electrical
Already a Member?
Click Here to Login
Not yet a Member?
Click Here to Register for Free!
Former Member
Send PM
Portland, TN - USA
Joined: 4/29/2003
Posts: 805
Vette(s): 1972 Coupe
Anything, but Stock and more mods to come!
SSBC Force 10 Brakes, 3.73, TH350, 355 CID, Rack and Pinion, Vette Brakes suspension front and rear.
Hey Everyone Need a little guidance or help here. I have pulled my engine harness and AC harness to refurbish them. A couple of the Harness connectors need to be replaced where they have contacted a header and have some burned marks on them.
I know there are tons of places out there to get a new harness, but where are they getting the connectors to reproduce them? I would like to simply buy the connectors and pins that I need and restore/fix the harness I have rather then spend the $150+ for a complete new one. Has anyone every purchased just the connector ends from one of the harness manufacturers or is there a source out there for buying these?
I've tried searching the internet with no avail.
Help!!
I know there are tons of places out there to get a new harness, but where are they getting the connectors to reproduce them? I would like to simply buy the connectors and pins that I need and restore/fix the harness I have rather then spend the $150+ for a complete new one. Has anyone every purchased just the connector ends from one of the harness manufacturers or is there a source out there for buying these?
I've tried searching the internet with no avail.
Help!!


SPONSOR AD:: (Our Sponsors help support C3VR)
You can usually get the terminals for GM dealers. They often get theirs from Curtis Ind, in Cleveland. You local dealer may have other suppliers.
Ken Styer
Ken Styer
Former Member
Send PM
Portland, TN - USA
Joined: 4/29/2003
Posts: 805
Vette(s): 1972 Coupe
Anything, but Stock and more mods to come!
SSBC Force 10 Brakes, 3.73, TH350, 355 CID, Rack and Pinion, Vette Brakes suspension front and rear.


Former Member
Send PM
Frederick, MD - USA
Joined: 9/8/2003
Posts: 3398
Vette(s): 1969 convertible L71 427/435 4-speed black interior
You might also try some parts stores like NAPA. They have electrical catalogs with pictures or drawings of connectors they can get. You might find what you want that way if dealers can't help.
Many of the connectors used on our Vettes are the same as other GM models of the same vintage. You could possibly get the connectors you need at a salvage yard with wires already attached and then splice them in back in the covered part of the harness where it won't show.
You can get the terminals from your better parts stores (NAPA, CarQuest, etc.) It is called a type 56 terminal because they were "invented" in 1956. The plastic ends are found in many GM cars from the mid 50s through the mid 80's and are still used by the heavy truck industry if you have access to any big truck junkyards.
try theses people. I think they have what you might need. Waytek, Inc 800-328-2724 http://www.waytekwire.com
in Forum: C3 Electrical
SPONSOR AD: (Our Sponsors help support C3VR)