Home page
SPONSOR AD

Support our Vendors!  |  Advertise Here

Topic: Shake steering wheel to start

in Forum: C3 Electrical


Already a Member?
Login
Not yet a Member?
Register for Free!

Shake steering wheel to start (1/4)
 12/28/23 10:23pm
Hellscream
Former Member

Send Private Message


Vette(s):
1975 Chevrolet Corvette Stingray


Joined: 2/7/2022
Posts: 1

Have to shake steering wheel to start the vette where do I start to fix.



______________

75 Chevrolet Corvette Stingray

84 Honda V65 Magna 

86 Honda Goldwing 1200

2000 Ford F250 Super Duty 

2015 Kenworth T680 

Our Sponsors help support C3VR
Re: Shake steering wheel to start (2/4)
 12/29/23 2:10am
73shark
Limited Member
Send Private Message

Overland Park, KS - USA

Vette(s):
1973 Orange Metallic Coupe (orig owner), L82, 4 spd (WR), PS, (A/C & PW (I installed from wrecked 73)), leather, AM/FM Stereo, ran with '65 FI unit earlier & will again some day.


Joined: 7/9/2003
Posts: 888

All I can think of would be to start w/ the ignition switch.  It's at the base of the steering column and is connected by a rod to the key lock.



______________

1973 L-82 4 spd

Re: Shake steering wheel to start (3/4)
 1/10/24 2:15pm
Steevo
Limited Member
Send Private Message

San Diego, CA - USA

Vette(s):
'73 L48 Coupe, 383, M20, A/C, Electric Windows. Matterhorn White Jet-Glo w/ Dark Blue interior. Rochester, Edelbrock, Blackjack Ceramics, Borlas w/ 2.5" mandrel X over, Cooper Cobras on both OEM Steel and Aluminum Wheels.


Joined: 11/10/2013
Posts: 63

That's where I would start to look too.

At about half-way down the steering column is a long box-like thing where wire ribbons connect to; one ribbon from the steering wheel and one going under the dash, held on with a couple screws IIRC. It is a slide switch, which is activated by a rod that comes from the Ignition Key mechanism. Shaking the Steering Wheel may have something to do with that Rod moving slightly enough to allow the switch down there to make contact. It's contacts could just be dirty/faulty.

I'd check out the security of that Rod and lower Switch first. Ignition Key Switch mechanism, to see if it's pushing the Rod down far enough to activate the lower slide Switch, would be my 2nd choice to look.

Good Luck.

Steve



______________

 

 

Re: Shake steering wheel to start (4/4)
 1/10/24 3:55pm
manchestersharkLifetime Member
Lifetime Member
Send Private Message

Equinunk, PA - USA

Vette(s):
1972 conv, 4-speed, 350, 200hp, numbers match, rally wheels, war bonnett yellow w/white top. good condition, nice driver.


Joined: 10/31/2007
Posts: 2434

Just as a F.Y.I. There is a slight amount of extra slot in the switch. It can be adjusted on the column at the screws a tad to make better connection, or engaging in the contacts. 



______________


Click on image for full view

Our Sponsors help support C3VR