So, what's a good alternative routing for the plug wires? I just changed wires and I really don't feel like removing the starter just to run the wires in the stock location. I'm not running headers (yet) so all I've got is the heat from the manifolds. The wires are Accel 8mm yellow. Right now its a mess under the hood, the front four cylinders are the problem. Any help y'all can give would be greatly appreciated.

Thanks,

I take it you don't have any wire brackets on the manifold heads. Lokk into getting some. try NAPA first fro stock GM ones that should work. they just bolt onto one of the manifold cover nuts or you could try plastic tieoffs if you can find places away from the engine to tie off to.

I ended up getting some Mr. Gasket wire looms from Advance Auto. Problem solved, and it looks nice to boot. Thanks for your advice!

your welcome , some things are easier to fix than others ,and cheaper, thank goodness