Home page
SPONSOR AD SPONSOR AD

Topic: turn signals

in Forum: C3 Electrical


turn signals

Posted: 10/14/04 3:40am Message 1 of 2
Profile Pic
Lifetime MemberLifetime Member
Send PM
BILOXI, MS - USA
Joined: 12/8/2001
Posts: 547
Vette(s): 1969 rag top
Two weeks age before going to Cruis I notcied my inspection sticker was expired so I followed the wife to get it inspected. three miles from home I noticed the pasenger side brake light and turn signal suddenly stopped working, we went to the inspection station where I took off the lens cover and checked the bulb after reseating the bulb the lights worked fine. Now I notice the passenger side tuen signal comes on but doesen't blink (the drivers side works fine. Need suggestions! |hammer|


Annicorvette
Lifetime member # 35

SPONSOR AD:: (Our Sponsors help support C3VR)

turn signals

Posted: 10/14/04 10:54am Message 2 of 2
Profile Pic
Lifetime MemberLifetime Member
Moderator
Send PM
CUYAHOGA FALLS, OH - USA
Joined: 12/2/2003
Posts: 6424
Vette(s): 1975 C3 Red, T-Tops, Black Interior. All I need is time and money! Getting there!
If the rear light comes on and does not blink, check the front bulb. See if it's working.

The turn signal blinks due to the amperage flow throught the flasher. It's like a circuit breaker. It gets hot, trips off, cools and trips back on.

When it does not have enought current flow, it won't blink. Low current flow is a burned out bulb, or dim bulb due to poor connection, or no light at all due to bad connection or switch.


in Forum: C3 Electrical


SPONSOR AD: (Our Sponsors help support C3VR)