Topic: When in doubt, reverse the wires.....
in Forum: C3 Electrical
Already a Member?
Click Here to Login
Not yet a Member?
Click Here to Register for Free!
I fixed it! I had the headlight switch vacuum lines switched. Headlights are back to normal. Unfortunately, when I tried to remove the headlight switch knob, I pulled it completely off the stem. I can deal with that.
Wipers. They work! In a moment of desperation, I decided to reverse the electrical connection to the wiper switch (i.e. turn it over). That fixed it. I hooked it up wrong when I put the dash back together. I think the original problem with the wipers was the switch solenoid that's mounted on the back of the tach (I replaced that and the relay that's under the console).
I think I qualify for that PHD in taking things apart and a GED in putting them back together.
Wipers. They work! In a moment of desperation, I decided to reverse the electrical connection to the wiper switch (i.e. turn it over). That fixed it. I hooked it up wrong when I put the dash back together. I think the original problem with the wipers was the switch solenoid that's mounted on the back of the tach (I replaced that and the relay that's under the console).
I think I qualify for that PHD in taking things apart and a GED in putting them back together.
SPONSOR AD:: (Our Sponsors help support C3VR)
Lifetime MemberModerator
Moses Lake, WA - USA
Joined: 4/16/2005
Posts: 2134
Vette(s): 1976 L48 4-spd, Mahogany Metalic exterior, Buckskin interior 350ci/350hp, 3rd owner, fiberglass spring, 255/50-16's Torq-Thrust II
Don't feel bad, I got my headlight switch hoses backwards too when I did my interior
. Oh well ya got a 50 50 chance the way I figure it
. Oh well ya got a 50 50 chance the way I figure itin Forum: C3 Electrical
SPONSOR AD: (Our Sponsors help support C3VR)