Topic: window motor disasemble
in Forum: C3 Electrical
Already a Member?
Click Here to Login
Not yet a Member?
Click Here to Register for Free!
SPONSOR AD:: (Our Sponsors help support C3VR)
Lifetime MemberHard or difficult? I haven't done them on my vette, but I have on several other GM vehicles so I would assume the process is the same.
Hard, somewhat, difficult, no. Pull down the door panel. Drill out the three rivets holding in the old motor. Pull the electrical connection off the motor. If you don't have access to rivets that big, you can bolt the new one back in. Plug in the connection and reassemble the door panel. Plan on a few cuts and scratches from the sheet metal. Here again, beer makes it easier.
well I got the motor out it has a cover plate you take off then there are three bolts and the motor is out. when I put the other motor in I had to use my old gears. not for sure what the problem but the gears seem to slip not for sure if its the gears on the moter or the splin that sit on top of the gears
in Forum: C3 Electrical
SPONSOR AD: (Our Sponsors help support C3VR)