Home page
SPONSOR AD

Topic: Window motor

in Forum: C3 Electrical

Window motor

Posted: 6/8/17 2:26pm Message 1 of 3
Profile Pic
Former Member
Send PM
Peru, IN - USA
Joined: 6/2/2010
Posts: 87
Vette(s): 1978 Blue Edition 2001 Torch Red
Looking for quality drivers side window motor. Anyone purchased one and satisfied? Lots of suppliers out there. Cost not an issue. Thanks....


SPONSOR AD:: (Our Sponsors help support C3VR)

Re: Window motor

Posted: 10/13/17 8:46am Message 2 of 3
Limited Member
Send PM
CHESHIRE, CT - USA
Joined: 5/2/2016
Posts: 64
Vette(s): 1969 350 4 spd drop top 1972 350 auto coupe
How did you make out with your PW motor? I just installed a LH motor in a 72, I bought the motor from Bairs. Bolted right into place, moves great, all I had to do was add a little grease on the pinion gear and install the back plate.
 
These use a different power pin setup so you have to use the adapter wire connector to tie it into the original wire harness.  Hopefully this will last a long time.



Re: Window motor

Posted: 10/14/17 8:21am Message 3 of 3
Profile Pic
Former Member
Send PM
Kimberling City, MO - USA
Joined: 12/2/2012
Posts: 49
Vette(s): 1976 Stingray
I purchased both of mine from Corvette America, almost 5 years ago and they work fine.


in Forum: C3 Electrical


SPONSOR AD: (Our Sponsors help support C3VR)