Home page
SPONSOR AD SPONSOR AD

Topic: 81 REAR SUSPENSION REBUILD QUESTIONS

in Forum: C3 Engines, Driveline and Handling


81 REAR SUSPENSION REBUILD QUESTIONS

Posted: 9/22/04 10:28pm Message 1 of 3
Former Member
Send PM
pineville, LA - USA
Joined: 2/26/2004
Posts: 46
Vette(s): 1981 silver over charcoal coupe
Hi all!! well I need a little advice, does anyone know if a complete rear suspension rebuild package is available? Im not looking to install a performance package just replace all the rubber spring perches, bushings strut rods etc etc will also probably replace swing arm bushings and bearings as well as all the u-joints and so on then line it up and stop all that rear steer I have now... any suggestions would be appreciated Thanks Vettehead1963


|COLOR=SILVER| |/COLOR||B| |/B|
SPONSOR AD:: (Our Sponsors help support C3VR)

81 REAR SUSPENSION REBUILD QUESTIONS

Posted: 9/22/04 10:59pm Message 2 of 3
Profile Pic
Lifetime MemberLifetime Member
Send PM
Hot Springs, AR - USA
Joined: 4/24/2004
Posts: 3236
Vette(s): 69 Conv #'s match 427, TKO-600/.64, 3.36HD-Posi, HT, T/T, PS, PB, PW, SP, Leather, Comp XE264HR & Roller Rockers & Lifters, Air-Gap RPM intake, Holley St Av 770 VS, MSD 6AL+Dist+Blaster SS, K&N, Jet-Hot Hooker Side-Pipes, Steeroids, Al Rad, Spal Fans
for a stock setup... I think corvette central has one
or try vette brakes and products..

they have a stock kit and numerous performance kits
www.vettebrakes.com


81 REAR SUSPENSION REBUILD QUESTIONS

Posted: 9/23/04 6:53am Message 3 of 3
Former Member
Send PM
Portland, TN - USA
Joined: 4/29/2003
Posts: 805
Vette(s): 1972 Coupe Anything, but Stock and more mods to come! SSBC Force 10 Brakes, 3.73, TH350, 355 CID, Rack and Pinion, Vette Brakes suspension front and rear.
http://www.corvettecentral.com
http://www.zipproducts.com
http://www.vansteel.com

There are lots of places that you can go to, start requesting their catalogs and build yourself a library.


in Forum: C3 Engines, Driveline and Handling


SPONSOR AD: (Our Sponsors help support C3VR)