im looking for poly rear swar bay end link bushings for a FACTORY bar.

I can find rubber ones

here is the ecklers part

http://www.ecklers.com/product.asp?dept%5Fid=1846&pf%5Fid=A7186&mscssid=FS520VST90PU9M7BXPG522943EV32G08

in rubber..

vbandp, docrebuild, eclers, midamerica all list it as rubber..

someone has to make this in poly !!

anyone got an idea..

also.. does anyone have any serviceable used rear shock mounts that theyd sell cheap i have 2 passenger side mounts.. one is fubar.. one is questionable.. drivers side is iffy as well..

I would try one of these companies.

hotchkis
pst


And I know Van Steel has them, because he lists them in his catalog. He can actually rebuild those for you if you send them to him.

rebuild the shockmounts ??

btw...

out of stock at vansteel..

not sold seperately at pst..

in stock at muskegon..

|UPDATED|12/17/2004 1:18:39 PM (AZT)|/UPDATED|

I meant rebuild the strut rods. If your shock mounts were like mine they were Toast. Pricey little item.

I've used www.fastcorvette.com in the past with good results.

mine are kinda rough.. the shaft is good on passenger side but threads are "fair"

on the drivers side.. the shaft is kinda worn and wavy.. threads are good..

Shark,

I agree with you, despite using the proper tool, I destroyed my threads and had to replace my shock mounts too.

I have found that you end up having to replace just about everything that is connected to the part that you originally intended to replace.

These cars can truly be a money pit (still love 'em).

Ben, I know that you dropped a pretty big wad already, but for another $80 (plus shipping) you might as well continue to ask Santa for new parts.

Besides, I like the way all of the new parts fit together.

Good luck,

Anthony

yeah i probably will replace these ..

i just hate to spend more and more and more.. im trying to slow the bleeding