Topic: Brake Calipers
in Forum: C3 Engines, Driveline and Handling
Already a Member?
Click Here to Login
Not yet a Member?
Click Here to Register for Free!

Suffolk, VA - USA
Joined: 7/26/2005
Posts: 59
Vette(s): 1972 Convertible, A/C, with matching numbers. Sunflower yellow.
Does anyone know how to tell if your brake caliper is stainless steel sleeved????
Thanks
SPONSOR AD:: (Our Sponsors help support C3VR)

Moderator
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 20226
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/
Am-Fm/map light National/Regional/Chapter NCRS "Top Flight"
#2-1985 Bright Red/Carmine Cp.L-98/auto
Member: NCRS, NCRS Texas, Corvette Legends of Texas
Unfortunately, the only way to tell is to pull the cal. off, take the pistons out, and look.
If the cals. have been sleeved, you will see the sleeve. It will be very shiny, compared to the rest of the caliper body. There will also be no rust in the bore. A non-sleeved bore will have rust/corrosion in it(and will most likely be leaking, anyway!).
Some reman places that sleeve the calipers will stamp them as such, but it's not a sure thing to look for.
My '74 has sleeved cals. in the front, but not in the back
, and there are no markings on the sleeved ones.
Hope this description helps.

If the cals. have been sleeved, you will see the sleeve. It will be very shiny, compared to the rest of the caliper body. There will also be no rust in the bore. A non-sleeved bore will have rust/corrosion in it(and will most likely be leaking, anyway!).
Some reman places that sleeve the calipers will stamp them as such, but it's not a sure thing to look for.
My '74 has sleeved cals. in the front, but not in the back

Hope this description helps.
Joel Adams
C3VR Lifetime Member #56
My Link
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"
in Forum: C3 Engines, Driveline and Handling
SPONSOR AD: (Our Sponsors help support C3VR)