Home page
SPONSOR AD SPONSOR AD

Topic: Brake Rattle

in Forum: C3 Engines, Driveline and Handling


Brake Rattle

Posted: 5/26/07 3:50am Message 1 of 4
Former Member
Send PM
Simpsonville, SC - USA
Joined: 1/21/2007
Posts: 85
Vette(s): 1978 25th. Silver Anniversary Edition 350 L-82 Stock
I have noticed when I hit a bump I can hear what sounds like the front brake pads rattling.  When I hit a bump with the brakes applied, I don’t hear the rattle.  My brakes work fine.  What causes this?



SPONSOR AD:: (Our Sponsors help support C3VR)

Brake Rattle

Posted: 5/26/07 5:24am Message 2 of 4
Lifetime MemberLifetime Member
Moderator
Send PM
BINGHAMTON, NY - USA
Joined: 7/19/2003
Posts: 3808
Vette(s): ......
Sounds like its time for new pads,you can get isolaters that stick onto the pads that will stop,the rattle and noise.


C3VR Lifetime Member #93

Brake Rattle

Posted: 5/26/07 8:27am Message 3 of 4
Profile Pic
Lifetime MemberLifetime Member
Moderator
Send PM
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 20225
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/ Am-Fm/map light National/Regional/Chapter NCRS "Top Flight" #2-1985 Bright Red/Carmine Cp.L-98/auto Member: NCRS, NCRS Texas, Corvette Legends of Texas
The brake pads "float" in the calipers. You will sometimes hear them "tick" as you drive, especially if you're in between two buildings. That noise is just the pads moving against the caliper, and the pin.
You should check all of the attaching hardware to be safe, tho. Make sure none of the bolts that hold the caliper are loose.


Joel Adams
C3VR Lifetime Member #56    

My Link


(click for Texas-sized view!)
             NCRS

"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"

Brake Rattle

Posted: 5/29/07 8:10pm Message 4 of 4
Profile Pic
Standard Member
Send PM
Scottsdale, AZ - USA
Joined: 5/23/2007
Posts: 617
Vette(s): 1981 Corvette Two-Tone Claret color, 4 spd, C7 Vert
One other thing to check....your ignition shielding rattling on the manifolds.  I need to rebend a tab or two every couple of years to tighten up the fit.
JU



      Only 34 years together

in Forum: C3 Engines, Driveline and Handling


SPONSOR AD: (Our Sponsors help support C3VR)