I might thrash it occasionally, but it really is just a street ride.  Muskegon brakes, I will check it out

Thanks-JR

Try Autozone. They have them in stock for under $60, plus no s/h. And yes they are stainless sleeved.

Matt

[QUOTE=mkapp7879]Original Delcos are more than adequate for a street driven Vette. If already stainless sleeved I'd just go with a rebuild kit. $15 per caliper for original lip seal style or about $30 per for o-ring conversion. I keep some rebuild kits on hand for quick repairs. Pick up (or build) a pressure bleeder.   Mike[/QUOTE]

If money is not an issue, go with the "O" ring stainless steel caliper and NEVER have a proble again. The "O" ring design also does not allow air to be sucked back in the brake lines should there be any run out. Give our sponsor, Vansteel a call. You will not ever regret doing it right once. 

I just went through this and my brake pedal is firmer than ever.

This and a nickel gets you a nickel.

Bill

Thanks, went to autozone, 49 bucks plus a refundable core.  They are stainless steel sleeved, but not o-ring sealed.  I will rebuild with the o-rings in the future, at least I have like new calipers to work with.  Thanks for all the help.

A smile and a quarter wont even get you a cup of coffee anymore.

maybe there are more than one supplier, mine are delco re-build's by a company named fenco.