Home page
SPONSOR AD SPONSOR AD

Topic: Changing A Flat

in Forum: C3 Engines, Driveline and Handling


Changing A Flat

Posted: 11/1/06 9:59am Message 11 of 17
Former Member
Send PM
Joined: 3/27/2006
Posts: 380
Regarding "Fix-A-Flat"/identical other emergency tire inflators?

WARNING: whatever you do, do not--repeat, DO NOT--leave a can of this stuff in your car if it's anyplace where heat or direct sunlight can affect it.

Unless, that is, you would like to experience having to remove a nasty, stinky, gummy substance the consistency of rubber cement from all over your interior. And I do mean all over. As in every square inch of carpet, seats, glass, dash, headliner, etc.

It will explode. Literally. Like a bomb. Shred the can and spew the contents everywhere. Trying to clean that up is not a pleasant way to spend a weekend. And yes, it will take you an entire weekend to clean up the mess. That's with two people working at it. Plus, you'll never get it all out. You'll be finding blobs of the disgusting stuff on an ongoing basis. And on top of it all, you'll get to drive around in a vehicle that reeks of "Goo Gone" for many weeks after the disaster. Think of the worst phony citrus-smelling air freshener you can imagine--and multiply times ten.

Don't ask me how I know.


SPONSOR AD:: (Our Sponsors help support C3VR)

Changing A Flat

Posted: 11/23/06 8:23pm Message 12 of 17
Profile Pic
Lifetime MemberLifetime Member
Moderator
Send PM
CUYAHOGA FALLS, OH - USA
Joined: 12/2/2003
Posts: 6424
Vette(s): 1975 C3 Red, T-Tops, Black Interior. All I need is time and money! Getting there!
There is also a 12 volt impact wrench that works off the cigarette lighter socket.   It's very slow, but does the job.   My father in law used to have one years ago.


Changing A Flat

Posted: 11/23/06 8:43pm Message 13 of 17
Profile Pic
Lifetime MemberLifetime Member
Send PM
HOWELL, NJ - USA
Joined: 5/18/2004
Posts: 6812
Vette(s): 1979, Targa Blue (72 Color), Pace Car rear spoiler, L88 hood, Dark blue factory interior, 525HP 406, HD 700R4, 370 gears,Steeroids, composite rear spring, TT IIs wrapped in T/A Radials.
Fix a flat will also eventually glue the beads of the tires to your nice aluminum or steel rims if you use enough of it. Ouch
 
If you use it, make sure the rim is cleaned really well once you either get the tire repaired or replace the tire.
 
FAF is not a permamnent fix by any means and may get you stuck away from the city lights again!!!Dead



LukesVette Homepage
Veteran of Operation Iraqi Freedom
101st Airborne(AirAssault!)
God Bless America

Support Our Troops


     

Changing A Flat

Posted: 11/23/06 9:27pm Message 14 of 17
Lifetime MemberLifetime Member
Send PM
Montesano, WA - USA
Joined: 9/27/2003
Posts: 1931
Vette(s): had a really nice one. sold it to a good friend. Purchased 2004 custom coupe in Feb. 2009 did not tell anyone here until August 2009. BAD I KNOW.
okay gotta go with micki on this one, some of the smartest money spent.  will fix your tire, tow, lock out, jumps, good room rates, discount on food and a lot of other things.  it will work with any vechile you are in even if you are not driving, check out the members deal tab to see if there are AAA discounts in your area for members. check into it, seems that through discounts over a year i pay for my membership every year.
Larry



Changing A Flat

Posted: 11/23/06 10:05pm Message 15 of 17
Profile Pic
Lifetime MemberLifetime Member
Send PM
Greensburg, IN - USA
Joined: 9/24/2003
Posts: 5189
Vette(s): Previous: 1984 Coupe, 1988 Maroon Coupe, 1989 Coupe, 2001 Roadster Present: 1967 Stingray Roadster, 1976 Stingray Coupe, 1989 Roadster..
If you don't choose AAA you might consider the change by using a break over bar. They free up the lugs very easily.
Here is an alternative to a conventional jack that utilizes no effort:

Airbag Link


Fix a flat works but as said makes a mess for those who have to deal with the tire later. It does get you going in a pinch though. (I keep a can in my trucks toolbox).





Changing A Flat

Posted: 11/24/06 1:28pm Message 16 of 17
Former Member
Send PM
Naples, FL - USA
Joined: 2/26/2005
Posts: 133
Vette(s): 1976 coupe with a custom body and a 396 big block with nitrous installed. Runs great!!
As long as the puncture(not catastrophic failure)is in the bottom of the tire and not in the side wall I use a tire plug kit. Along with a side cutter/dykes to pull the nail/screw out and cut the plug off,a small compressor will do wonders. You wouldn't have to remove the tire just move the car to expose the offending item and yank,plug then pump.I have fixed many flats at work and on the road for unfortunate people and myself. I don't leave home with out them. You can use fix a flat but there are many side effects. It works when all else fails but you must make sure that you tell the tire guy that FAF is in there because the propellant in some are EXPLOSIVE! Not a fun way to end the day at the tire shop.custom762006-11-24 13:29:29


Changing A Flat

Posted: 11/24/06 2:18pm Message 17 of 17
Profile Pic
Lifetime MemberLifetime Member
Send PM
Fox Island, WA - USA
Joined: 6/20/2005
Posts: 4068
Vette(s): 1978 Indy Pace Car 4851 of 6502, Auto, L-48

I agree with Mick and Larry, AAA is the way to go, they will get you outta just about any bind.

But I've got a related question, will your wide-azz flat tire fix up in the carrier after putting on the spare?  Seriously, my tires are so wide that it doesn't look like it would fit in the carrier, and I certantly don't wanna put it inside with me.




MARK
LIFETIME MEMBER #117

Click here to see my new friend P-Racer
"Keep up the Pace"

in Forum: C3 Engines, Driveline and Handling


SPONSOR AD: (Our Sponsors help support C3VR)