Topic: Help with reassembling 1977 steering wheel with tilt/telescopic
in Forum: C3 Engines, Driveline and Handling
Already a Member?
Click Here to Login
Not yet a Member?
Click Here to Register for Free!
The tool that I have is made by performance tool part # W80650 called Steering wheel lock Plate tool sales for 10.99 at our local part store Costlees auto parts
SPONSOR AD:: (Our Sponsors help support C3VR)
rraider1,
Thanx a million for information! I will see about buying this tool for future use.
Anni ... 77 Red Corvette
Lifetime MemberModerator
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 20225
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/
Am-Fm/map light National/Regional/Chapter NCRS "Top Flight"
#2-1985 Bright Red/Carmine Cp.L-98/auto
Member: NCRS, NCRS Texas, Corvette Legends of Texas
[QUOTE=rraider1] ...if it would help I could also post a better picture on your tool you might be able to replace the center bolt with a longer threaded bolt.[/QUOTE]
Yeah...that's a totally different thing than mine...
Mine does not have a hole thru the center...just the solid, threaded part that threads onto the steering shaft, where the nut goes. Then there's a nut you tighten down, and it presses on the lock-plate.
Here's mine...
Thanks for the info on yours, too!
Yeah...that's a totally different thing than mine...
Mine does not have a hole thru the center...just the solid, threaded part that threads onto the steering shaft, where the nut goes. Then there's a nut you tighten down, and it presses on the lock-plate.
Here's mine...
Thanks for the info on yours, too!
Joel Adams
C3VR Lifetime Member #56 
My Link 
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"
in Forum: C3 Engines, Driveline and Handling
SPONSOR AD: (Our Sponsors help support C3VR)