Home page
SPONSOR AD SPONSOR AD

Topic: help

in Forum: C3 Engines, Driveline and Handling


help

Posted: 4/21/07 7:23am Message 1 of 4
Profile Pic
Former Member
Send PM
Joined: 11/30/2006
Posts: 441
i got a deal on a pair of rotors,was told they are front end,but why the machined inner surface?, they are marked no.60240cb
any ideas?
Joanne2007-04-21 07:39:32


1979 Corvette
SPONSOR AD:: (Our Sponsors help support C3VR)

help

Posted: 4/21/07 8:09am Message 2 of 4
Former Member
Send PM
williamston, NC - USA
Joined: 1/19/2006
Posts: 353
Vette(s): 1969 coupe, 350, m22 trans, ac, black on black,
 could have been scarred or had burrs ect. on the surface allso could have been cut for clearance,,hey a deal is allways good. should fit ok,rd


help

Posted: 4/21/07 9:26am Message 3 of 4
Profile Pic
Lifetime MemberLifetime Member
Moderator
Send PM
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 20225
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/ Am-Fm/map light National/Regional/Chapter NCRS "Top Flight" #2-1985 Bright Red/Carmine Cp.L-98/auto Member: NCRS, NCRS Texas, Corvette Legends of Texas
Those are REAR rotors! The inner machined surface is for the emergency brake...


Joel Adams
C3VR Lifetime Member #56    

My Link


(click for Texas-sized view!)
             NCRS

"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"

help

Posted: 4/21/07 9:35am Message 4 of 4
Profile Pic
Former Member
Send PM
Joined: 11/30/2006
Posts: 441
thats what i was thinking.ok thanksjust have to order fronts then, a bit rear over here.


1979 Corvette

in Forum: C3 Engines, Driveline and Handling


SPONSOR AD: (Our Sponsors help support C3VR)