Home page
SPONSOR AD SPONSOR AD

Topic: "play" in steering of '76 vette

in Forum: C3 Engines, Driveline and Handling


"play" in steering of '76 vette

Posted: 11/13/06 4:53pm Message 1 of 10
Former Member
Send PM
Hilliard, OH - USA
Joined: 11/2/2006
Posts: 23
Vette(s): 1976 Corvette, originally dark green, currently black with grey cloth interior. Very nice shape!
This isn't anything major, but my '76 vette has a little bit of play to it with regard to steering. You can go about 1 inch left and right of center (with the steering wheel) and the wheels won't move. If you move it a little bit more, the wheels will turn.

I've heard that this is normal with these cars....

Any ideas?

Thanks!
Brian



SPONSOR AD:: (Our Sponsors help support C3VR)

"play" in steering of '76 vette

Posted: 11/13/06 5:08pm Message 2 of 10
Former Member
Send PM
williamston, NC - USA
Joined: 1/19/2006
Posts: 353
Vette(s): 1969 coupe, 350, m22 trans, ac, black on black,
 could be tie rod ends., or could be you need to adjst the steering worm gear,,rd


"play" in steering of '76 vette

Posted: 11/13/06 9:06pm Message 3 of 10
Profile Pic
Lifetime MemberLifetime Member
Moderator
Send PM
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 20225
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/ Am-Fm/map light National/Regional/Chapter NCRS "Top Flight" #2-1985 Bright Red/Carmine Cp.L-98/auto Member: NCRS, NCRS Texas, Corvette Legends of Texas
"Normal" with "THESE" cars?!?!
Whaddaya tryin ta say there, Brian?! Maybe normal if it's worn out, but otherwise, not!

Check the "rag-joint" first. It's the first thing to give up the ghost in the steering. The rag-joint is at the bottom of the column, where it attatches to the gearbox. They tear quite often, and will create just about and inch or so of "free play" in the wheel. I'd start there...


Joel Adams
C3VR Lifetime Member #56    

My Link


(click for Texas-sized view!)
             NCRS

"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"

"play" in steering of '76 vette

Posted: 11/14/06 5:06pm Message 4 of 10
Lifetime MemberLifetime Member
Moderator
Send PM
BINGHAMTON, NY - USA
Joined: 7/19/2003
Posts: 3808
Vette(s): ......
These are High Performance,Race Ready machines,Solid as a rock WackoAin't nothin normal about our cars,or US for that matterLOL Ifin it aint the rag joint,check the Pitman arm ,thats the arm that comes off the bottom of the steering box,see if it has any play in it,also idler arm,and like Joel said ,tie rod endsThumbs%20UpRon 782006-11-14 17:11:41


C3VR Lifetime Member #93

"play" in steering of '76 vette

Posted: 11/23/06 8:16pm Message 5 of 10
Profile Pic
Lifetime MemberLifetime Member
Moderator
Send PM
CUYAHOGA FALLS, OH - USA
Joined: 12/2/2003
Posts: 6424
Vette(s): 1975 C3 Red, T-Tops, Black Interior. All I need is time and money! Getting there!
Actually any  loose parts in the front end can cause this.  Don't forget to check all the bushings.
A worn power steering control valve can also cause the play.
 
When new, these cars did NOT have the play.



"play" in steering of '76 vette

Posted: 12/11/06 12:04pm Message 6 of 10
Profile Pic
Lifetime MemberLifetime Member
Send PM
Gloucester, VA - USA
Joined: 1/29/2005
Posts: 1453
Vette(s): 1979 T-Top, Metallic Green ZZ4 350/355 hp 405 ft/lbs torque Dual Spal Fans 700R4 4 Spd O/D Transmission 2004 Z06 Commemorative Edition
How can the pitman arm have play in it? I mean, how will it be visual??


Lifetime Member #73

The Money Pit.... and my niece

(click to see a slightly larger version)

"play" in steering of '76 vette

Posted: 12/11/06 3:18pm Message 7 of 10
Lifetime MemberLifetime Member
Moderator
Send PM
BINGHAMTON, NY - USA
Joined: 7/19/2003
Posts: 3808
Vette(s): ......
I meant too say'that ball joint at the end of the Pitman Arm ,sorryEmbarrassed,good catch JimThumbs%20Up


C3VR Lifetime Member #93

"play" in steering of '76 vette

Posted: 12/11/06 3:47pm Message 8 of 10
Profile Pic
Lifetime MemberLifetime Member
Send PM
Gloucester, VA - USA
Joined: 1/29/2005
Posts: 1453
Vette(s): 1979 T-Top, Metallic Green ZZ4 350/355 hp 405 ft/lbs torque Dual Spal Fans 700R4 4 Spd O/D Transmission 2004 Z06 Commemorative Edition

 Reason I asked...replaced my steering box and rag joint...took it for a ride today and hit a bump and had to fight the car into it's lane. Car also seemed to want to wander.

 My thought was that maybe I need to adjust the worm screw adjustment tighter but your comment threw me off.

 Any ideas, I mean all I did was replace the components by the steering box



Lifetime Member #73

The Money Pit.... and my niece

(click to see a slightly larger version)

"play" in steering of '76 vette

Posted: 12/13/06 3:28pm Message 9 of 10
Profile Pic
Lifetime MemberLifetime Member
Send PM
Gloucester, VA - USA
Joined: 1/29/2005
Posts: 1453
Vette(s): 1979 T-Top, Metallic Green ZZ4 350/355 hp 405 ft/lbs torque Dual Spal Fans 700R4 4 Spd O/D Transmission 2004 Z06 Commemorative Edition
Anyone?


Lifetime Member #73

The Money Pit.... and my niece

(click to see a slightly larger version)

"play" in steering of '76 vette

Posted: 12/13/06 6:14pm Message 10 of 10
Former Member
Send PM
Australia
Joined: 5/6/2004
Posts: 535
Vette(s): 71 Coupe Black on Black

A wheel alignment at a reputable garage will let you know if it's anything serious.  The wheel alignment won't hurt either.  While you're at it get the back end done as well.  Most people forget to have the back done on Vettes and it will ensure your tyres wear correctly.




in Forum: C3 Engines, Driveline and Handling


SPONSOR AD: (Our Sponsors help support C3VR)