Home page
SPONSOR AD SPONSOR AD

Topic: Power Steering

in Forum: C3 Engines, Driveline and Handling


Power Steering

Posted: 4/5/06 5:08pm Message 1 of 3
Former Member
Send PM
Canada
Joined: 6/28/2005
Posts: 7
Vette(s): 79 vette
I have some leaks in my power steering control valve & cylinder.
I was told when I buy re-manufactured parts to replace these that all the fittings are different and existing hoses do not fit. Does any body have any experience with this?
Thanks in advance.


SPONSOR AD:: (Our Sponsors help support C3VR)

Power Steering

Posted: 4/5/06 6:16pm Message 2 of 3
Profile Pic
Former Member
Send PM
goldens bridge, NY - USA
Joined: 11/3/2003
Posts: 498
Vette(s): 1972 T-Top 350 auto, matching numbers,Blue, ac

I changed mine out with remfg valve and cylinder - all fittings and hoses fit perfectly - I did change all the hoses also .

No problems here

Big Al





Power Steering

Posted: 4/5/06 6:18pm Message 3 of 3
Profile Pic
Lifetime MemberLifetime Member
Moderator
Send PM
CUYAHOGA FALLS, OH - USA
Joined: 12/2/2003
Posts: 6424
Vette(s): 1975 C3 Red, T-Tops, Black Interior. All I need is time and money! Getting there!
Are you sure you have the hoses in the correct place?  Several of the fittings can be different depending on location.


in Forum: C3 Engines, Driveline and Handling


SPONSOR AD: (Our Sponsors help support C3VR)