Home page
SPONSOR AD SPONSOR AD

Topic: PS Pump

in Forum: C3 Engines, Driveline and Handling


PS Pump

Posted: 3/27/06 8:41am Message 1 of 3
Profile Pic
Lifetime MemberLifetime Member
Send PM
Gloucester, VA - USA
Joined: 1/29/2005
Posts: 1453
Vette(s): 1979 T-Top, Metallic Green ZZ4 350/355 hp 405 ft/lbs torque Dual Spal Fans 700R4 4 Spd O/D Transmission 2004 Z06 Commemorative Edition

 

 I'm blowing fluid out of the top, any reason besides over full that might cause this?  Steering seems okay..




Lifetime Member #73

The Money Pit.... and my niece

(click to see a slightly larger version)

SPONSOR AD:: (Our Sponsors help support C3VR)

PS Pump

Posted: 3/27/06 5:08pm Message 2 of 3
Former Member
Send PM
Saxonburg, PA - USA
Joined: 11/14/2003
Posts: 143
Vette(s): 1982 Black over red, doing a resto.

Over fill will do that, also check the return hose for kinks or blockage( the one with hose clamps).

Also make sure your belt is not slipping or oily.

Denny




PS Pump

Posted: 3/27/06 5:53pm Message 3 of 3
Profile Pic
Lifetime MemberLifetime Member
Moderator
Send PM
CUYAHOGA FALLS, OH - USA
Joined: 12/2/2003
Posts: 6424
Vette(s): 1975 C3 Red, T-Tops, Black Interior. All I need is time and money! Getting there!

I'm guessing this is when it running?  If you turn the wheel with the engine off, it will spill out.

If all else is well, I agree with overfilling.  As the fluid get hot it expands, and out it comes.




in Forum: C3 Engines, Driveline and Handling


SPONSOR AD: (Our Sponsors help support C3VR)