Topic: Rag joint question
in Forum: C3 Engines, Driveline and Handling
Already a Member?
Click Here to Login
Not yet a Member?
Click Here to Register for Free!
Every strap that is supposed to be on the car is in the kit. The frame to body are braided like they are supposed to be. And even a ground strap for the antenna. It's a good kit, all the eyelets and clips are the right size and it's relatively cheap. (under 20 bucks if I recall)
SPONSOR AD:: (Our Sponsors help support C3VR)
Lifetime MemberHot Springs, AR - USA
Joined: 4/24/2004
Posts: 3236
Vette(s): 69 Conv #'s match 427, TKO-600/.64, 3.36HD-Posi, HT, T/T, PS, PB, PW, SP, Leather, Comp XE264HR & Roller Rockers & Lifters, Air-Gap RPM intake, Holley St Av 770 VS, MSD 6AL+Dist+Blaster SS, K&N, Jet-Hot Hooker Side-Pipes, Steeroids, Al Rad, Spal Fans
| daveb12 said: Every strap that is supposed to be on the car is in the kit. The frame to body are braided like they are supposed to be. And even a ground strap for the antenna. It's a good kit, all the eyelets and clips are the right size and it's relatively cheap. (under 20 bucks if I recall) |
i was wondering of it had the main battery to frame .. and the frame to starter cables..
No, those are sold separately. The short frame to starter isn't that bad, but the long one is a bit pricey compared to the sum of the parts, I made mine. I crimped and soldered the ends and used copper. Taped it with rubber tape and it looks fine. It doesn't look NCRS, but looks fine.
in Forum: C3 Engines, Driveline and Handling
SPONSOR AD: (Our Sponsors help support C3VR)