Topic: Recommendations on brake components replacement
in Forum: C3 Engines, Driveline and Handling
Already a Member?
Click Here to Login
Not yet a Member?
Click Here to Register for Free!
Okay, wise ones, I'm going to replace the brake system on my 69 Convertible. I'm replacing the calipers, pads, anything else that needs it. What brand(s) do you recommend? 

SPONSOR AD:: (Our Sponsors help support C3VR)
Just make sure that if you do a purchase/core exchange, that you trade GM Delco for GM Delco.
Your call.
Usual stuff, stainless steel, and new O ring technology.

Your call.
Usual stuff, stainless steel, and new O ring technology.

Stay away from any components that are imported, especially ones that come from China. Rayloc (available at all NAPA stores)are pretty good OEM compatible parts. Be sure to check for rotor run-out. Nothing will kill a caliper faster then excessive run-out. You need to have less then .004" for a really good system.
I bought my stuff from Lone Star Caliper. They exibit at most of the shows on the east coast at least. Very nice people, good product. I had a caliper leak just out of warranty, they replaced it no charge, no questions asked. Look at your hard lines and hoses. If they are 34 years old , they may not be in the best condition.
http://www.lonestarcaliper.com/CorvSSCaliper.htm
|UPDATED|1/13/2004 11:00:34 AM (AZT)|/UPDATED|
http://www.lonestarcaliper.com/CorvSSCaliper.htm
|UPDATED|1/13/2004 11:00:34 AM (AZT)|/UPDATED|
Former Member
Send PM
Eastern part of, CT - USA
Joined: 1/29/2002
Posts: 319
Vette(s): White 73 convertible - 350/auto, A/C PS, PB, PW, leather, t/t, two tops
Also had a 69 t-top 20 years ago
Plan on replacing the hoses even if they look good. They fail from the inside. Joe
Thats no lie I had to replace one this fall I thought the caliper took a sh-- ,put on a new one,tried to bleed it,nothing,the rubber line was rotted inside and plugged solid
put on a new one and wa-la brakes 


C3VR Lifetime Member #93
Replaced all 4 of my calipers (turned in to 6 after all was said and done). The first set I bought were not delco/gm brand. After spending hours and hours on a internal leak in the brake system, I again replaced the back calipers (thus 6 total calipers). I replaced them with delco ss (stainless steel). Haven't had a problem since.
1975/L48/Coupe/4 Speed(1 of 1057)/Headers/true duals/aluminum intake/holley 750/MSD ignition/roller rockers/
|IMG|http://www.C3VR.com/member_uploads/1701_1800/1717/BSVette75d_sig.jpg |/IMG|

Lawrenceville, GA - USA
Joined: 10/25/2002
Posts: 100
Vette(s): 1968 427 coupe and 96 LT4 six speed Gran Sport clone
in Forum: C3 Engines, Driveline and Handling
SPONSOR AD: (Our Sponsors help support C3VR)