Topic: Removing our bearing races from spindle support
in Forum: C3 Engines, Driveline and Handling
Already a Member?
Click Here to Login
Not yet a Member?
Click Here to Register for Free!
Former Member
Send PM
BURBANK, WA - USA
Joined: 12/21/2004
Posts: 59
Vette(s): 1981 Frost Beige Coupe... all original.. My SECOND Love...
Is there a safe/easy way to remove the outer bearing races from the spindle support piece without using a hydraulic press? Suggestions are most welcome...
SPONSOR AD:: (Our Sponsors help support C3VR)
Lifetime MemberSHELBYVILLE, TN - USA
Joined: 7/5/2002
Posts: 3942
Vette(s): 1976 L48 auto
1978 L82 4speed
1994 LT1 6speed
1978 L82 4speed
1994 LT1 6speed
Well.... i've always used a punch and hammer... once the bearing assembly is out, and the spindle out.. there are two grooves inside the assembly(usually where all the grease fills up), just have to follow the grooves down to the face of the race with the punch and tap out...
StingrayJim 
NCM Lifetime Member #1936
Stingray's '76���������������������������� StingrayJr's '78���������������������������Lil Red '94 
(click each one to see a bigger version)
Lifetime MemberModerator
Moses Lake, WA - USA
Joined: 4/16/2005
Posts: 2134
Vette(s): 1976 L48 4-spd, Mahogany Metalic exterior, Buckskin interior 350ci/350hp, 3rd owner, fiberglass spring, 255/50-16's Torq-Thrust II
I agree with Stingrayjim, that is how I did mine
Former Member
Send PM
BURBANK, WA - USA
Joined: 12/21/2004
Posts: 59
Vette(s): 1981 Frost Beige Coupe... all original.. My SECOND Love...
Right.. I didn't see the grooves until I looked under the grease.. Thanks for the help!
in Forum: C3 Engines, Driveline and Handling
SPONSOR AD: (Our Sponsors help support C3VR)