Home page
SPONSOR AD SPONSOR AD

Topic: Steering box, to rebuild or not

in Forum: C3 Engines, Driveline and Handling


Steering box, to rebuild or not

Posted: 11/14/04 6:35pm Message 1 of 4
Former Member
Send PM
Glendale, AZ - USA
Joined: 11/15/2003
Posts: 134
Vette(s): 1971 T-top. I just had car shipped from my parents house in florida where it has sat for over 12 years..It is going to be a long project!
Ok, most everything is out of engine bay. I took off steering box to clean up and paint before putting in engine. So the question is how do I determine if I should have it rebuild or not. It seems to turn good, and the car only has 70K miles. If I rebuild, is it hard to do or best left to a pro????


Someday!
SPONSOR AD:: (Our Sponsors help support C3VR)

Steering box, to rebuild or not

Posted: 11/14/04 7:10pm Message 2 of 4
Profile Pic
Lifetime MemberLifetime Member
Moderator
Send PM
CUYAHOGA FALLS, OH - USA
Joined: 12/2/2003
Posts: 6424
Vette(s): 1975 C3 Red, T-Tops, Black Interior. All I need is time and money! Getting there!
It's not too bad if you have a few special tools. Without them, it can still be done, but it's a bit tougher. But with the proper shop manual, nothing most of the handy guys here can't handle.

Check for play in the box. If it feels good, check the fluid. Do you see any metal flakes or dust floating in the fluid?

If both are okay, you may want to replace the seals, reset the adjustments, and just use it as it is. Otherwise the rebuild is in order.


Steering box, to rebuild or not

Posted: 11/15/04 6:42am Message 3 of 4
Former Member
Send PM
Glendale, AZ - USA
Joined: 11/15/2003
Posts: 134
Vette(s): 1971 T-top. I just had car shipped from my parents house in florida where it has sat for over 12 years..It is going to be a long project!
Goes to show what I know,,,,didnt know you could check the fluid.


Someday!

Steering box, to rebuild or not

Posted: 11/15/04 6:51am Message 4 of 4
Limited Member
Send PM
Newark, DE - USA
Joined: 7/26/2004
Posts: 468
Vette(s): 1968 Conv, 454HO,500HP-600TQ, TKO-600,3:70 HD rear,hotrod air, custom paint & suspension,1973 Ruby Red,T-top, 383 Stroker, TK)-500,frame off restro, 1967 Dodge Coronet, 340 stroker to 406, Dana 60
When I bought my 68 the steering box was leaking (the headers were to close) I bought a rebuilt box, but there are alot of places that will rebuild yours if you don't feel like doing it yourself. A new or rebuilt steering box makes a big difference.
Good luck
Alan


                                               

in Forum: C3 Engines, Driveline and Handling


SPONSOR AD: (Our Sponsors help support C3VR)