Home page
SPONSOR AD

Topic: 82 Corvette Diverter valves Rough idle and engine dying out

in Forum: C3 Engines

82 Corvette Diverter valves Rough idle and engine dying out

Posted: 5/20/21 1:03pm Message 1 of 3
Former Member
Send PM
Joined: 8/16/2013
Posts: 11

My 82 starts with no problem. But would not idle and then dies out.  Years ago I change the diverter valve (used unit) ran fine without problems.  Now it started again.  Wondering if anyone know where I can get new diverter valves or how to repair them.

Any advice is appreciated.  Can drive car, would just run rough and dies out.

Thanks for any help.




SPONSOR AD:: (Our Sponsors help support C3VR)

Re: 82 Corvette Diverter valves Rough idle and engine dying out

Posted: 5/20/21 6:50pm Message 2 of 3
Profile Pic
Lifetime MemberLifetime Member
Moderator
Send PM
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 20214
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/ Am-Fm/map light National/Regional/Chapter NCRS "Top Flight" #2-1985 Bright Red/Carmine Cp.L-98/auto Member: NCRS, NCRS Texas, Corvette Legends of Texas

A diverter valve shouldn't have any effect on how the engine runs. The EGR valve, however will. Since it is an '82, I would suggest scanning the ECM for any trouble codes that might be stored, and troubleshoot from there.




Joel Adams
C3VR Lifetime Member #56    

My Link


(click for Texas-sized view!)
             NCRS

"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"

Re: 82 Corvette Diverter valves Rough idle and engine dying out

Posted: 5/21/21 12:01pm Message 3 of 3
Former Member
Send PM
Joined: 8/16/2013
Posts: 11

Thanks for the reply.  Check for engine code.  Got code 22, TPS.  So I will be ordering 1.  

Thanks for the help.




in Forum: C3 Engines


SPONSOR AD: (Our Sponsors help support C3VR)