Topic: Engine Torque
in Forum: C3 Engines
Already a Member?
Click Here to Login
Not yet a Member?
Click Here to Register for Free!
Well I have finally found a place to purchase a engine. Its Smeding and they have 2 engines that I am looking at. One is 330 HP with 430lbs of torque for 4,295. The other one is a 350 hp with 410lbs of torque for 3,695. So the 500.00 question is 20lbs of torque that much of a difference when driving for 500.00?
SPONSOR AD:: (Our Sponsors help support C3VR)

Moderator
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 20214
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/
Am-Fm/map light National/Regional/Chapter NCRS "Top Flight"
#2-1985 Bright Red/Carmine Cp.L-98/auto
Member: NCRS, NCRS Texas, Corvette Legends of Texas
Depends on the kind of driving ya do!
Torque is for driving...horsepower is for bragging....
Is 20hp/20ft-lbs worth $500? For normal, daily driving, and a bit of fun on w-ends, NO.
If yer bracket-racing on weekends, then, yes...

Torque is for driving...horsepower is for bragging....
Is 20hp/20ft-lbs worth $500? For normal, daily driving, and a bit of fun on w-ends, NO.
If yer bracket-racing on weekends, then, yes...

Joel Adams
C3VR Lifetime Member #56
My Link
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"
Go to Summitt racings web site, they have Edelbrock complete crate engines and chevy or merlin high hp engines, some carry 2 yr warranties, pretty much the same price, good luck

Manteca, CA - USA
Joined: 11/20/2005
Posts: 3623
Vette(s): 1978,two tone,Metalic Rootbeer & gold
1975 L48 4 speed
Even if the crate is a turnkey, you may need that much $ or more for incidentals in the transplant procedure. If money's tight, 20 lbs. torque ain't all that much. Good luck. Motors and paint are about the most exciting events of all. aceinthehole 2007-12-31 19:45:06
Jimmy B.
Just can't wait to get on the road again.
Click to see larger views!

Hot Springs, AR - USA
Joined: 4/24/2004
Posts: 3236
Vette(s): 69 Conv #'s match 427, TKO-600/.64, 3.36HD-Posi, HT, T/T, PS, PB, PW, SP, Leather, Comp XE264HR & Roller Rockers & Lifters, Air-Gap RPM intake, Holley St Av 770 VS, MSD 6AL+Dist+Blaster SS, K&N, Jet-Hot Hooker Side-Pipes, Steeroids, Al Rad, Spal Fans
[QUOTE=ossw1]Well I have finally found a place to purchase a engine. Its Smeding and they have 2 engines that I am looking at. One is 330 HP with 430lbs of torque for 4,295. The other one is a 350 hp with 410lbs of torque for 3,695. So the 500.00 question is 20lbs of torque that much of a difference when driving for 500.00? [/QUOTE]
cthulhu 2007-12-31 23:50:33
most importantly.... what rpm does it reach those peaks in HP and torque...
the peaks really don't mean as much as the curves
I would rather have an engine that has a good wide torque band with a lower peak than one that reaches a high peak in a narrow band or "sweet spot"
Well according to the numbers 350HP hits about 5000rpm and 4000rpm for the torque the 330hp hits about 4000 for the hp and 3500 for the torque.

Hot Springs, AR - USA
Joined: 4/24/2004
Posts: 3236
Vette(s): 69 Conv #'s match 427, TKO-600/.64, 3.36HD-Posi, HT, T/T, PS, PB, PW, SP, Leather, Comp XE264HR & Roller Rockers & Lifters, Air-Gap RPM intake, Holley St Av 770 VS, MSD 6AL+Dist+Blaster SS, K&N, Jet-Hot Hooker Side-Pipes, Steeroids, Al Rad, Spal Fans
[QUOTE=ossw1]Well according to the numbers 350HP hits about 5000rpm and 4000rpm for the torque the 330hp hits about 4000 for the hp and 3500 for the torque.[/QUOTE]
not seeing a curve and only seeing the peaks... id say the 330 hp is better as it has its peaks 500 rpm lower....
in Forum: C3 Engines
SPONSOR AD: (Our Sponsors help support C3VR)