Home page
SPONSOR AD

Topic: Plug on driver's side of intake manifold...

in Forum: C3 Engines


Plug on driver's side of intake manifold...

Posted: 7/29/03 6:03am Message 11 of 18
Former Member
Send PM
Joined: 5/17/2003
Posts: 64
P.S> the torq wrench would not fit the bolts right next to the carb so I used a open end wrench and just guessed at the torq 30lbs is quite a bit on a small bolt.
I am running a 350 sb and have used several differen't gaskets over the years and prefure fel-pro ms90314-2
this is a blue gasket that seals well. about $10
The gasket has a ridge or bump on one side by the ports this faces up during insulation. |saluteflag|

Try this forum out


http://corvetteactioncenter.com/index.php

|UPDATED|7/29/2003 6:03:28 AM|/UPDATED|



SPONSOR AD:: (Our Sponsors help support C3VR)

Plug on driver's side of intake manifold...

Posted: 7/29/03 4:55pm Message 12 of 18
Former Member
Send PM
Joined: 6/11/2003
Posts: 208
Vette(s): 1977 L48 Slightly Tweaked
Thanks for the tips. I'll tackle it this weekend probably. I'm lining up some help as I write this...


Plug on driver's side of intake manifold...

Posted: 8/3/03 5:14pm Message 13 of 18
Former Member
Send PM
Joined: 6/11/2003
Posts: 208
Vette(s): 1977 L48 Slightly Tweaked
Ok, another question. I've got an EGR valve on my Vette. The vacuum hose is disconnected and the fitting is plugged. So, can I get an intake manifold without the EGR provision, or do I need to get one that allows for EGR? |headscratch|


Plug on driver's side of intake manifold...

Posted: 8/3/03 5:46pm Message 14 of 18
Former Member
Send PM
Joined: 5/17/2003
Posts: 64
Depends on the state you live in.Are you required to do smog or inspection ,My 75 will be exempt from smog next year but do I need the equipment on my car?
I would call the DMV or go to a garage and ask them....
would be no fun to half to do all agin in a year..


Plug on driver's side of intake manifold...

Posted: 8/3/03 6:59pm Message 15 of 18
Former Member
Send PM
Joined: 6/11/2003
Posts: 208
Vette(s): 1977 L48 Slightly Tweaked
There is no inspection where I live, and I have no idea if there ever will be. I live way out in the country. Mainly, I need to know if it will screw up my engine if I get one with out it. They are less expensive without the EGR.


Plug on driver's side of intake manifold...

Posted: 8/3/03 7:08pm Message 16 of 18
Former Member
Send PM
Joined: 6/11/2003
Posts: 208
Vette(s): 1977 L48 Slightly Tweaked
Just visited the Ga. DOT and DMV websites. Only vehicles 24 years old and newer are to be inspected and then only in the Atlanta metro area. I'm exempt. |bouncy| So, does that mean I can get the manifold without the EGR?


Plug on driver's side of intake manifold...

Posted: 8/3/03 8:18pm Message 17 of 18
Former Member
Send PM
Joined: 5/17/2003
Posts: 64
My performer manifold has egr when I replaced my intake manifold gasket I used one with out the hole for egr so its just there for looks right now,does not effect the way it runs at all. |thumb|
I want to do hooker header and side pipes,But I need to find out first if I need the smoge stuff when my car is excempt next year 30yrs old .Ca requires this 75 to have a catalic converter air pump heat riser & egr valve.I will no longer half to pass a smoge but will there be a visual insp. incase of sale or every 2 yrs.
also side pipes are illegal in Ca. on any car.

|UPDATED|8/3/2003 8:18:11 PM|/UPDATED|



Plug on driver's side of intake manifold...

Posted: 8/3/03 10:27pm Message 18 of 18
Former Member
Send PM
Joined: 6/11/2003
Posts: 208
Vette(s): 1977 L48 Slightly Tweaked
Cool. I can save a few bucks. |thumb|


in Forum: C3 Engines


SPONSOR AD: (Our Sponsors help support C3VR)