Home page
SPONSOR AD

Topic: Pulley Below A/C

in Forum: C3 Engines

Pulley Below A/C

Posted: 6/27/08 7:33am Message 1 of 8
Profile Pic
Former Member
Send PM
METAIRIE, LA - USA
Joined: 6/7/2007
Posts: 144
Vette(s): 1979 BLACK COUPE
On my 79 there is a tension pulley, hard mounted right below the AC.  Not in my assembly manual?  Can it be just removed and discarded?   I do not have a air pump on my car also.  I am getting ready to do some work on the car and may replace it if needed.  That thing has to be going out, I don't know what type of bearing if any at all is in it. 79FOREVER2008-06-27 07:35:09


SPONSOR AD:: (Our Sponsors help support C3VR)

Pulley Below A/C

Posted: 6/27/08 7:52am Message 2 of 8
Lifetime MemberLifetime Member
Moderator
Send PM
BINGHAMTON, NY - USA
Joined: 7/19/2003
Posts: 3808
Vette(s): ......
If your A.I.R. pump is gone ya dont need the tensioner,yank that bad boy off and chuck it LOL.Alot of guys remove it and all the associated hardware,and plug off or change the exhaust manifolds,never know it was there.It depends on your state lawsThumbs%20UpRon 782008-06-27 07:57:46


C3VR Lifetime Member #93

Pulley Below A/C

Posted: 6/27/08 7:57am Message 3 of 8
Profile Pic
Former Member
Send PM
METAIRIE, LA - USA
Joined: 6/7/2007
Posts: 144
Vette(s): 1979 BLACK COUPE
It is holding tension on my AC belt, will the belt be ok w/o it?  Is your removed?
I am sure my manifolds have been changed, they don't have the tube ports.
79FOREVER2008-06-27 07:59:30


Pulley Below A/C

Posted: 6/27/08 8:15am Message 4 of 8
Lifetime MemberLifetime Member
Moderator
Send PM
BINGHAMTON, NY - USA
Joined: 7/19/2003
Posts: 3808
Vette(s): ......
Nope my 78 had no A.I.R.,it does have A.C.,my belt doesn't have a tensioner,adjusts at the compressor


C3VR Lifetime Member #93

Pulley Below A/C

Posted: 7/1/08 3:56am Message 5 of 8
Limited Member
Send PM
Little Rock, AR - USA
Joined: 7/10/2007
Posts: 123
Vette(s): 1982 Collector Edition
  I have an '82, can I remove the A.I.R.? We don't have any smog laws for older cars in my state.
terntes



Pulley Below A/C

Posted: 7/1/08 10:37am Message 6 of 8
Former Member
Send PM
Joined: 10/21/2003
Posts: 1220
[QUOTE=79FOREVER]On my 79 there is a tension pulley, hard mounted right below the AC.  Not in my assembly manual?  Can it be just removed and discarded?   I do not have a air pump on my car also.  I am getting ready to do some work on the car and may replace it if needed.  That thing has to be going out, I don't know what type of bearing if any at all is in it. [/QUOTE]
Do you have some type of aftermarket serpentine setup on your motor? I don't have any tension pulley on any of my Vettes, simply a guide for the belt under the compressor.



Pulley Below A/C

Posted: 7/1/08 8:14pm Message 7 of 8
Profile Pic
Lifetime MemberLifetime Member
Moderator
Send PM
CUYAHOGA FALLS, OH - USA
Joined: 12/2/2003
Posts: 6424
Vette(s): 1975 C3 Red, T-Tops, Black Interior. All I need is time and money! Getting there!
The federal boys from EPA are concerned for 25 years.  After, not at, 25 years they don't care about emissions anymore.  A few states do care.  Check your own state laws.


Pulley Below A/C

Posted: 7/2/08 7:50am Message 8 of 8
Profile Pic
Former Member
Send PM
METAIRIE, LA - USA
Joined: 6/7/2007
Posts: 144
Vette(s): 1979 BLACK COUPE

Ken,

Yes it is a guide pulley.   No special setup.


in Forum: C3 Engines


SPONSOR AD: (Our Sponsors help support C3VR)