Home page
SPONSOR AD

Topic: Strange problem

in Forum: C3 Engines


Strange problem

Posted: 3/12/05 7:19pm Message 1 of 4
Former Member
Send PM
Marion, IA - USA
Joined: 4/24/2004
Posts: 317
Vette(s): 1969 Corvette Stingray Convertible. Just bought it from my uncle who owned it since 1971. Fathom green, green interior. 350/300, T400.

I went to start the '69 after about 2 months today and it runs like crap. I cut the exhaust pipes off about 3 feet past the manifolds when I redid the rear suspension ( I was planning on replacing the exhaust anyway). It runs like it has a huge vaccum leak. Is this due to there being no backpressure now? I checked all the vac hoses and everything looks fine. I ordered out my new exhaust today at VetteFest from Mid America, 2 1/2 SS with DynoMax mufflers.

Thanks,

Matt




SPONSOR AD:: (Our Sponsors help support C3VR)

Strange problem

Posted: 3/13/05 7:40am Message 2 of 4
Profile Pic
Former Member
Send PM
Frederick, MD - USA
Joined: 9/8/2003
Posts: 3398
Vette(s): 1969 convertible L71 427/435 4-speed black interior
Did it run OK before you cut the exhaust off? A car does need a certain amount of backpressure to run properly. Depending on how a car is to be driven and how much power it's capable of putting out helps determine what size pipes are needed so there is an optimum amount of scavenging within the combustion chambers.

Drag cars that put out gobs of horsepower and torque at high rpm's don't have that problem and get away with open headers. Street cars run at varying rpm's so every part of their engine and exhaust system is a compromise.

After you install your new exhaust system the problem will likely go away.


Strange problem

Posted: 3/13/05 8:12am Message 3 of 4
Profile Pic
Lifetime MemberLifetime Member
Send PM
Waterford, MI - USA
Joined: 9/13/2002
Posts: 1750
Vette(s): 1973 Red coupe
Check the cap and rotor to see if they picked up moisture from sitting that long. I had the same problem with my Suburban after it sat for most of the summer and the cap was full of rust.


Brian - NCM Lifetime Member

73 coupe L48, Flat-top pistons, Performer RPM Heads, Crane Cam and roller rockers, Holley 650 vac sec. Performer intake,
3.55 gear BTO 200-4R trans,
Leather seats, Seatbelt Plus 3point seatbelts, Pioneer CD player
Magnaflow Exhuast System

Dewitt radiator and dual electric fans
Borgeson Steering box
 


Strange problem

Posted: 3/15/05 6:51am Message 4 of 4
Former Member
Send PM
Kingston, TN - USA
Joined: 7/5/2003
Posts: 900
Vette(s): 1970 Vert Both Tops Kiesler 5 Speed Steeroids Rack and Pinion Stayfast Convertible Top
I drove mine up to get my exhaust welded up to my collectors and the trip was about 20 miles. My car ran great with just shorty headers. Lots of noise but it still ran great the whole trip. As you can imagine the ride home was much quieter. So, having no exhaust on my car made no difference that I could tell in the way mine ran. I have always heard that a certain amount of backpressure was a good thing. 


in Forum: C3 Engines


SPONSOR AD: (Our Sponsors help support C3VR)