Home page
SPONSOR AD

Topic: The Motor is Out !!!

in Forum: C3 Engines


The Motor is Out !!!

Posted: 12/21/05 9:37am Message 11 of 14
Lifetime MemberLifetime Member
Send PM
Canada
Joined: 8/6/2004
Posts: 533
Vette(s): Coupe 74 - 454 Drive it like you stole it!
I don't know about NJ, but in my region (Tampa), it's hard to find over 93.  I have even seen a lot of stations not going higher than 91.  Where do you get 94 ?
 
I can't hardly use my creeper; in fact, I barely fit just sliding under unless I use a stand on each side.  I use carton boards; it collects the spills and it slides real easy.
 
Good luck with your project.  I will do the same as soon as I swap my townhouse for a real one WITH a double garage.  I'm targetting April/May.



SPONSOR AD:: (Our Sponsors help support C3VR)

The Motor is Out !!!

Posted: 12/21/05 12:07pm Message 12 of 14
Profile Pic
Former Member
Send PM
goldens bridge, NY - USA
Joined: 11/3/2003
Posts: 498
Vette(s): 1972 T-Top 350 auto, matching numbers,Blue, ac

Sound sweet - Cafefull of the cold - I got really sick once - laying on the floor doing an exaust on a 62 vette -pnemonia set in

definately carpet - or minimum -cardboard box flattened

Merry Xmas

Big Al





The Motor is Out !!!

Posted: 12/21/05 1:04pm Message 13 of 14
Former Member
Send PM
East Hanover, NJ - USA
Joined: 9/25/2004
Posts: 525
Vette(s): '68 Black Conv. Matching 327/300 4 Spd. P/S, P/B, P/W, Tele, A/C

74-454.......In NJ Sunoco Ulimate is 94 Octane.

After reading the forums,,,,,,It's good to see that a lot of us (i.e. VetterBob) are involved in Winter projects.

Working on these cars is like opening Pandora's box at times.

Happy Holidays........Anthony




The Motor is Out !!!

Posted: 12/21/05 1:39pm Message 14 of 14
Former Member
Send PM
Roseland, NJ - USA
Joined: 12/4/2003
Posts: 966
Vette(s): 1974, 454 with 4 on the floor, matching numbers.

Anthony, once you're all done, you should be very pleased with the results. Especially now you won't have to put up with Mustang Sally's insensitive remarks about your fogger machine .

 I've already done everything you're doing except for the engine. I'm planning to replace the timing chain and possibly do a cam/manifold/carb job in March. I haven't made up my mind yet. Hey, I just want to spend more time driving it during our limited season, than be be fixing it.

 




in Forum: C3 Engines


SPONSOR AD: (Our Sponsors help support C3VR)