Home page
SPONSOR AD

Topic: valve seals

in Forum: C3 Engines

Re: valve seals

Posted: 8/12/12 5:19pm Message 21 of 22
Profile Pic
Lifetime MemberLifetime Member
Moderator
Send PM
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 20214
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/ Am-Fm/map light National/Regional/Chapter NCRS "Top Flight" #2-1985 Bright Red/Carmine Cp.L-98/auto Member: NCRS, NCRS Texas, Corvette Legends of Texas
The seals ride on the valve stems...they move up/down with the valve, so they do fit quite snug. Some seals do fit on the guide boss AND the valve...those are "positive" seals. They seal completely, but they are "attached" to the guides themselves, and the valve stems move thru the seals.
The umbrella type seals do allow some oil to splash back onto the underside of the seals, and run down the stem, and onto the guides. Not as much as the cheesy o-rings, of course, but a little...enough to give some lubrication to the guides. Thumbs Up

|UPDATED|8/12/2012 5:19:36 PM (AZT)|/UPDATED|



Joel Adams
C3VR Lifetime Member #56    

My Link


(click for Texas-sized view!)
             NCRS

"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"

SPONSOR AD:: (Our Sponsors help support C3VR)

Re: valve seals

Posted: 8/12/12 10:36pm Message 22 of 22
Limited Member
Send PM
Overland Park, KS - USA
Joined: 7/9/2003
Posts: 914
Vette(s): 1973 Orange Metallic Coupe (orig owner), L82, 4 spd (WR), PS, (A/C & PW (I installed from wrecked 73)), leather, AM/FM Stereo, ran with '65 FI unit earlier & will again some day. 2023 Accelerate Yellow HTC Stingray
The kind I saw were the ones attached to the boss and fit tight around the valve stem.  I do remember seeing the other kind at a store now that you mentioned them, just never on an engine.  I can see how they would work better.


1973 L-82 4 spd

in Forum: C3 Engines


SPONSOR AD: (Our Sponsors help support C3VR)