Does any have the rt. rear section of a 68 birdcage I am looking to replace the door post pillar and about 10 to 12 inchs of the door sill . The #3 mount has rotted away. Thanks

I am not sure if this will help but I ran across this on EBAY.

Sorry I lost the link, lets try again...http://cgi.ebay.com/ebaymotors/Corvette-Body-Rear-Ha lf-1975-1982-76-77-78-79-80-81_W0QQcmdZViewItemQQcategoryZ42 611QQitemZ4630033785QQrdZ1

This is the body left over from the frame I needed for my wife's project. The frame will fit her 1975 Stingray but I do not know what year the body is. The floor pan is metal from the firewall to just behind the seats.

I am told by another ebayer the body is from 1978 through 1982.

The bad news: The firewall is junk. It looks like someone did repairs after an engine fire. The A pillars and t-top center have been cut. The fiberglass is cracked on the driver's side where the quarter panel meets the bumper. You can see the crack in the first picture. It is about 2" down from the top of the body line and about 2 1/2 inches long. The large marks below the crack are scratches.

The good news: The rear glass is intact and it will probably be cheap. The body is not in that bad of shape and can be used.

Pick up only. About 15 miles north of Des Moines, Iowa. I can help load on your trailer or local delivery is possible for a fee.

Please e-mail or call 515/229-3132 with any questions.

Thanks for looking.

Thanks but I don't think it will work on a 68