Home page
SPONSOR AD

Topic: Cable

in Forum: C3 Fuel, Emission Control, and Exhaust Systems


Cable

Posted: 4/19/05 9:02am Message 1 of 2
Profile Pic
Limited Member
Send PM
henderson, NV - USA
Joined: 2/7/2004
Posts: 715
Vette(s): 1977 Corvette l48 Custom

Hey guys,

THi is an odd question.... I did not know where to put it but....

I was looking at Corvette Central and I need a spedomiter/techomiter cable. I have no IDea which one to get their is all kinds of different lengths. I have a '77 with cruise control, and a 3SPD auto tranny....

1969-1977 SPEEDOMETER CABLE - AUTOMATIC LOWER 24" 213061 26.95 EACH

 

 

 

1969-1977 SPEEDOMETER CABLE - AUTOMATIC UPPER 42" 213060 17.95 EACH

 

 

 

1977-1982

SPEEDOMETER CABLE - LOWER WITH CRUISE CONTROL 49"

213075 20.95 EACH

Thanks guys.....

-Louis




-LOUIE

SPONSOR AD:: (Our Sponsors help support C3VR)

Cable

Posted: 4/19/05 11:22am Message 2 of 2
Former Member
Send PM
Edgewood, KY - USA
Joined: 10/26/2003
Posts: 339
Vette(s): 1981, Black/Black, Engine bumped to about 400HP.Ext/int mostly stock.

If you have cruise control, you have two cables, and "upper" and "lower".  They must have changed the location of the cruise control transducer half way thru the '77 production year in order for the two lower cables listed to be that different in length.  You need to figure out which of the two cables is bad anyway, before you order one, so I suggest you remove the bottom cable, which is MUCH easier than the upper, then check it to see if one of the plastic ends is mangled/missing, which indicates it is the problem cable, and while you're at it, you can measure the cable.  If you're transducer is mounted where mine is, which is on the driver's side fender under the brake booster wiper fluid tank, it cannot be the 24" cable, as there is no way that would reach from the transmission.




in Forum: C3 Fuel, Emission Control, and Exhaust Systems


SPONSOR AD: (Our Sponsors help support C3VR)