Home page
SPONSOR AD

Topic: Muffler Upgrade

in Forum: C3 Fuel, Emission Control, and Exhaust Systems

Muffler Upgrade

Posted: 4/4/09 9:06pm Message 1 of 4
Former Member
Send PM
Dutchess County, NY - USA
Joined: 8/27/2007
Posts: 2484
Vette(s): White '79 Corvette. It's a driver.
The exhaust system on my '79 (L-48) has gone through a few changes.
Three years ago I had the MAM 2.5" True Dual system with the Chambered Exhaust installed. It was too loud for my taste.
A while later I had the rear most portion of the exhaust system cut and installed the "Turbo" mufflers from MAM.
Today I had Magnaflows installed in place of the "Turbo" mufflers. It sounds great!
 
My question is this;
With the chambered sections still in place am I losing any sound quality or flow capability to the new Magnaflows?
I'd consider replacing the chambered sections with straight sections of pipe if it's necessary.
Lem'me know.
Kevin
 
 



SPONSOR AD:: (Our Sponsors help support C3VR)

Muffler Upgrade

Posted: 4/5/09 5:36am Message 2 of 4
Former Member
Send PM
Kingston, TN - USA
Joined: 7/5/2003
Posts: 900
Vette(s): 1970 Vert Both Tops Kiesler 5 Speed Steeroids Rack and Pinion Stayfast Convertible Top
I have just the Magnaflows on my 70 and am very happy with the sound. The chambered sections will probably only cost you HP at the top end if I were guessing. Cutting them out may make the system a tad louder which can be okay if you are happy with the sound the Magnaflows make.


Muffler Upgrade

Posted: 4/5/09 5:55am Message 3 of 4
Profile Pic
Former Member
Send PM
Newport, MI - USA
Joined: 6/9/2005
Posts: 932
Vette(s): 1980 L-48 still in the middle of a frame-off.
Tax refunds are great.Thumbs Up



Corvettes and women are the same...You want to make love to them but they keep breaking down.

Muffler Upgrade

Posted: 4/5/09 7:37pm Message 4 of 4
Former Member
Send PM
Dutchess County, NY - USA
Joined: 8/27/2007
Posts: 2484
Vette(s): White '79 Corvette. It's a driver.
Eddie70,
'Not tryin' to complicate this, I swear!
BUT, if I'd gain HP at the top end, would I lose HP at the low end?
It came to mind so I had to ask.
Thanks for your thoughts on this!
Kevin



in Forum: C3 Fuel, Emission Control, and Exhaust Systems


SPONSOR AD: (Our Sponsors help support C3VR)