Topic: vacuum line?
in Forum: C3 Fuel, Emission Control, and Exhaust Systems
Already a Member?
Click Here to Login
Not yet a Member?
Click Here to Register for Free!
Former Member
Send PM
spring hill, FL - USA
Joined: 5/18/2002
Posts: 33
Vette(s): 92 coupe, full minor custom, in & out
On my 79 L82 air filter housing, there is a vacuum controled flapper valve in each snorkel. Where is this vacuum line connected to?
Also, on the rear of the carb, there are two vacuum ports, one upper, one lower, where do they go?
Thanks for any help. Drawings or clear pics will help.
Also, on the rear of the carb, there are two vacuum ports, one upper, one lower, where do they go?
Thanks for any help. Drawings or clear pics will help.
michael Black Sheep Squadron |URL|http://www.rogerscorvette.com/free/lintini.htm|/URL| |URL|http://www.cruisercustomizing.com/blackvette|/URL|
SPONSOR AD:: (Our Sponsors help support C3VR)
The two lines from the snorkels go to the temp sensor underneath the air cleaner and from there to a port on the bottom rear of the carb. I don't know what the other port is for, I only have the one, unless you are talking about the port for the power brakes.
in Forum: C3 Fuel, Emission Control, and Exhaust Systems
SPONSOR AD: (Our Sponsors help support C3VR)