Home page
SPONSOR AD

Topic: Valve issues?

in Forum: C3 Fuel, Emission Control, and Exhaust Systems


Valve issues?

Posted: 4/22/05 11:26pm Message 1 of 3
Former Member
Send PM
hollywood, CA - USA
Joined: 3/18/2005
Posts: 10
Vette(s): 1978 red immaculate
`I've got a GM Performance parts crate engine (290hp/350) that has 4k
mniles on it an edlebrock 600cfm and Performer intake. Lately I've been
getting smoke from the exhause (new headers and split exhaust)
Especially when it's in Drive. Blue smoke meaning oil I think. Is there a
way to see if it's the valve seats before I go through the warranty hassle
with Chevy?




78 Red What a project
SPONSOR AD:: (Our Sponsors help support C3VR)

Valve issues?

Posted: 4/22/05 11:43pm Message 2 of 3
Former Member
Send PM
baytown, TX - USA
Joined: 4/21/2004
Posts: 160
Vette(s): 1979 maui blue/doe skin, fuel injected 383, 6-speed manual, hooker sidepipes, 3.90 gear
If it smokes continuous it might be rings. If it goes away and comes back at start up its seals. You can't check the seals without pulling the valve springs. And you should not be having any of those problems with that many miles unless you run it HOT and burned the rings.


Valve issues?

Posted: 4/23/05 1:36pm Message 3 of 3
Former Member
Send PM
hollywood, CA - USA
Joined: 3/18/2005
Posts: 10
Vette(s): 1978 red immaculate
it Makes me sad..but should be a warranty issue....I am curious if anyone
has used a GM Performance Parts Crate motor and had a warranty
repair...if so, was it painful or painless....


78 Red What a project

in Forum: C3 Fuel, Emission Control, and Exhaust Systems


SPONSOR AD: (Our Sponsors help support C3VR)