Topic: Anybody know where the purple wire goes?
in Forum: C3 General Discussion
Already a Member?
Click Here to Login
Not yet a Member?
Click Here to Register for Free!
I tried hooking it to the blinker fluid sensor, but thats the yellow wire
Just thought I'd share my interesting weekend, with ya all. I now have 1 of the door solenoids hooked up so I now have a remote door. Soon to come is remote doors, hood and power windows. I also have alot of my digital gauges wired.
I shot a little 400k video of my first remote door access at http://www.fast77.com/pics/door1.avi

|UPDATED|11/20/2004 11:09:01 AM (AZT)|/UPDATED|

Just thought I'd share my interesting weekend, with ya all. I now have 1 of the door solenoids hooked up so I now have a remote door. Soon to come is remote doors, hood and power windows. I also have alot of my digital gauges wired.
I shot a little 400k video of my first remote door access at http://www.fast77.com/pics/door1.avi

|UPDATED|11/20/2004 11:09:01 AM (AZT)|/UPDATED|
SPONSOR AD:: (Our Sponsors help support C3VR)
You must know my wife.....Wait.....Honey are you using Ron's account?
Former Member
Send PM
Columbia City, Oregon, OR - USA
Joined: 2/6/2004
Posts: 49
Vette(s): "86", "89", and finally an "81" Red/Tan. I call her "Sweet Pea".
Cool website!!... 


KEYPORT, NJ - USA
Joined: 7/6/2002
Posts: 493
Vette(s): 1973 Stingray Coupe and C5 and C6 Coupes.
Oh that door is just too much
And you're going digital.
N I C E !


And you're going digital.

N I C E !

1973 Coupe
(click to see a bigger version)

Thats funny.
I keep pushing the remote and watching the door open

It's funny how that started. I couldn't put the stock door handles back in because of the roll cage. So I came up with this idea and it was realatively cheap too.

I made a little more progress today. I now have everything wired except the tach.....
I dont have a place to hook it to. I have a unilite distributor. Any suggestions?



Former Member
Send PM
Portland, TN - USA
Joined: 4/29/2003
Posts: 805
Vette(s): 1972 Coupe
Anything, but Stock and more mods to come!
SSBC Force 10 Brakes, 3.73, TH350, 355 CID, Rack and Pinion, Vette Brakes suspension front and rear.
Depends! I see you have a dakota Digital. I have one as well and there is a tach output on that box.
But if you have a MSD or Ignition box, there is a tach output wire there as well. I would check to see how DD suggests putting it all in.
But if you have a MSD or Ignition box, there is a tach output wire there as well. I would check to see how DD suggests putting it all in.

Actually I went with the Norskog Digital, but its still a good suggestion. I will check into that. Thanks.
in Forum: C3 General Discussion
SPONSOR AD: (Our Sponsors help support C3VR)