Home page
SPONSOR AD SPONSOR AD

Topic: Build Sheet Questions

in Forum: C3 General Discussion


Build Sheet Questions

Posted: 1/17/04 4:41pm Message 1 of 4
Former Member
Send PM
Hobe Sound, FL - USA
Joined: 11/19/2003
Posts: 354
Vette(s): 1962 - 1963 - 1965 - 1980 1986 Roadster 1979 - L-82 - 1989 Roadster 1990 ZR-1.
Maybe someone can help with some codes I found on build
sheet today. 1979 L-82. I have matched up the options on the car of what I could see. A couple things are not matching up.

I managed to get 3/4 of it, and messed up the middle of it, removing some codes there. I did salvage most of it. I dropped the tank 1/2 way down, and put my hand up there, and very carefully removed the best I could.

Question : Are there any codes showing on sheet, that are not necessarily optioned on the car ? Reason is that the sheet is showing C-49, (RW Defroster), and it is not on this Vette. Now this code was in the middle of the sheet, and the extension of it is torn away.

FE-7 : Gymkhana suspension: No rear sway bar on car. Front sway bar is 7/8". Codes 6HY and 7HY, LH front spring, RH front spring on sheet. Antonick's book says HD springs.
Car has a 9 leaf transverse spring.

These codes on sheet, and no extension of item seen from torn sheet. Reads like this: B6-E - Sleeve______? (sheet torn here). B5Z Less______ ? (sheet torn here). 69Z Less Key________? (sheet torn here).

These codes shown, and cannot see extension of these items: NA-5 ....? N-40 ....?
N-40 .........?

Are there any codes from producton coded areas that can help to get another sheet more legible ?

Advise: If you are going to attempt to get a build sheet from the tank. Drain the gas. Get help. Put it on a lift. Take tank all the way down, and write it all down while it is intact.
Thanks for any help. |saluteflag|


SPONSOR AD:: (Our Sponsors help support C3VR)

Build Sheet Questions

Posted: 1/17/04 10:25pm Message 2 of 4
Former Member
Send PM
Joined: 10/21/2003
Posts: 1220
Boatman, there are several items listed on my 79 build sheet that are not on the window sticker.Examples are:A51 bucket seat,B32 floor mats, CD4 pulsew/wiper,C94 del-dom lamp,D18 speedo gear, D34 vi/van mirror, E5Z less adaptor, E6E sleeve speedo, GS4 3.70 axle, T83 headlamp warning, UP8 radio prov. U26 lamp-eng. comp. U41 low fuel ind. VK3 lic plate mnt. Also listed are exterior and interior color codes. As for the FE7 Gynkhana suspension, the front springs are 6HY and 7HY. Non gymkhana springs are 6AJ and 7AJ(this on my 78). But the FE7 should have the rear stabilizer. I know there was a heavy duty shock option, maybe came with stiffer springs? Be happy to send you a copy of the 79 sheet. Email me if interested. Mike


Build Sheet Questions

Posted: 1/17/04 10:31pm Message 3 of 4
Former Member
Send PM
Joined: 10/21/2003
Posts: 1220
Boatman, back again. NA5 is standard emission. Don't know about N40, could be steel rally wheels? N90 is the aluminum wheels. Mike


Build Sheet Questions

Posted: 1/18/04 5:32am Message 4 of 4
Former Member
Send PM
Hobe Sound, FL - USA
Joined: 11/19/2003
Posts: 354
Vette(s): 1962 - 1963 - 1965 - 1980 1986 Roadster 1979 - L-82 - 1989 Roadster 1990 ZR-1.
MKapp - Sent you an e mail, thanks |saluteflag|


in Forum: C3 General Discussion


SPONSOR AD: (Our Sponsors help support C3VR)