Home page
SPONSOR AD SPONSOR AD

Topic: Build Sheets

in Forum: C3 General Discussion


Build Sheets

Posted: 11/5/10 11:23am Message 1 of 10
Profile Pic
Lifetime MemberLifetime Member
Send PM
Temple City, CA - USA
Joined: 10/3/2010
Posts: 365
Vette(s): 1969 Daytona Yellow. 350 / Automatic.

Can one get to the tank top build sheet (if its still there) without dismantling the car?  My car is finally in route and this is the first thing I want to look for.

Jim




SPONSOR AD:: (Our Sponsors help support C3VR)

Build Sheets

Posted: 11/5/10 11:49am Message 2 of 10
Former Member
Send PM
Mounds View, MN - USA
Joined: 5/24/2007
Posts: 1031
Vette(s): 70 LT1 coupe, 69 350 HP coupe, 69 390HP 427 coupe, 71 LS5 convert, 85 coupe, 93 coupe
Not really.  You can usually see if it is there by pushing down the rubber seal around the fuel filler, but need to drop the tank to have a chance of getting it out intact.  That is really not THAT bad a job.

Larry



Build Sheets

Posted: 11/5/10 12:36pm Message 3 of 10
Profile Pic
Lifetime MemberLifetime Member
Send PM
Temple City, CA - USA
Joined: 10/3/2010
Posts: 365
Vette(s): 1969 Daytona Yellow. 350 / Automatic.
Thanks Larry!  That was quick!


Build Sheets

Posted: 11/5/10 11:20pm Message 4 of 10
Profile Pic
Standard Member
Send PM
Florence, KY - USA
Joined: 9/9/2007
Posts: 143
Vette(s): 1977 Coupe; yellow, 4 speed, one option car with original engine
If you actually want the build sheet then yes, drop the tank. If you are curious about options you can get a copy of the original invouce from:
GM Media Archive & Vehicle Invoice Collection at Allied Vaughn
Detroit, MI
p.734-421-0273 x.107
p.734-261-5086



current
1977 Coupe
 
gone but not forgotten
1996 Grand Sport
1984 coupe 
1974 coupe
1964 roadster

Build Sheets

Posted: 11/6/10 5:49am Message 5 of 10
Former Member
Send PM
Tecumseh, MI - USA
Joined: 9/14/2003
Posts: 221
Vette(s): 1980 all org. with 18000 act. miles dk claret with matching interior..Eagle alloys ..loaded..excellent cond.
A few years ago I dropped the spare tire carrier on my 80 to do some spring work,and lo & behold, there was my build sheet glued to the top/front of the  gas tank. Was able to retreve 98%  of it. Car only had less than 18000 miles on it so it was very readable....Big smile


Build Sheets

Posted: 11/6/10 8:30am Message 6 of 10
Profile Pic
Former Member
Send PM
York, PA - USA
Joined: 5/18/2010
Posts: 1518
Vette(s): 1969 daytona conv. all original 350 350 380 4 sp w/air..and hard top
Hey Lb..I didn't know you could get an original invoice for a car our age..I thought that started later on like mid 70's? I found something about it on the NCRS website. I will try as I have everything but that..and the jack and tools which I am hunting for now. Be careful taking off the tank sticker as it is on there with some thick goop..mine had about a two inch diameter goop pile on it that removed with a razor blade scraper..put it in an acid free folder in a dry place. love the chrome and get some pics on here when it arrives..take a lot of pics because it only happens once!
Rich



My first parade at Carlisle 2010

Build Sheets

Posted: 11/6/10 11:02am Message 7 of 10
Profile Pic
Lifetime MemberLifetime Member
Send PM
Temple City, CA - USA
Joined: 10/3/2010
Posts: 365
Vette(s): 1969 Daytona Yellow. 350 / Automatic.
GM Media Archive says it only has Chevrolet from 1977.  I'm back to the gas tank.  But I was also told there is a build sheet behind the dash somewhere.  Aargh!Geek


Build Sheets

Posted: 11/6/10 6:41pm Message 8 of 10
Profile Pic
Former Member
Send PM
York, PA - USA
Joined: 5/18/2010
Posts: 1518
Vette(s): 1969 daytona conv. all original 350 350 380 4 sp w/air..and hard top
I don't know about the sheet behind the dash but the one on the tank is gold!
Rich



My first parade at Carlisle 2010

Build Sheets

Posted: 11/6/10 7:07pm Message 9 of 10
Profile Pic
Lifetime MemberLifetime Member
Send PM
Indianapolis, IN - USA
Joined: 9/3/2006
Posts: 2431
Vette(s): Silver 1974 Convertible - L82 4 speed Low miles (was only 8,900 when I bought it in March 2006) - Now 54K miles. Original owner bought it as an investment for son's college expenses. 2008 Jetstream Blue Convertible
People have reported finding build sheets in the dash, under/in seats, etc, but the top of the tank is your best bet.  Hope for the best, but don't get too disappointed if you don't find one there.  I've heard that many cars either don't have them, or they have withered away to almost nothing.
 
Good luck!  Let us know how it turns out



I wanted a Corvette my whole life, but I never dreamed of all the wonderful people I would meet because of it!


����� States Visited Map

target=_blank>Click for another pic!���� And yet another!

Build Sheets

Posted: 11/7/10 9:10am Message 10 of 10
Profile Pic
Former Member
Send PM
New Albany, OH - USA
Joined: 8/17/2010
Posts: 173
Vette(s): 1980 Coupe / Snowcrest White / L48, 350 / Comp Cam / Edelbrock Heads / Cyclone Intake / Holley Carb / Holley Fuel Pump / Patriot Headers / Dual Exhaust / Magnaflow Mufflers / 1964 Coupe / Riverside Red / L76, 327, 365hp
I found the Build Sheet in my car when I was replacing the carpet.  Unfortunately for me, it wasn't for my car.  I have also heard that you can find them under the dash and on top of the gas tank.
 
I have made this offer before but if anyone knows who has a 1980, VIN 1Z878AS408371, I would be more than happy to send it to you.  It is in pretty good shape.



Chuck

in Forum: C3 General Discussion


SPONSOR AD: (Our Sponsors help support C3VR)